User Guide
Table Of Contents
- Contents
- Product Basics
- Using the Control Panel
- Product Parts Locations
- Checking for Software Updates
- Using Power Saving Settings
- Epson Connect Solutions for Smartphones, Tablets, and More
- Using AirPrint
- Using Google Cloud Print
- Android Printing Using the Epson Print Enabler
- Using Fire OS Printing
- Using Windows 10 Mobile Printing
- Using Epson Print and Scan App with Windows Tablets
- Wi-Fi or Wired Networking
- Loading Paper
- Placing Originals on the Product
- Copying
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Double-sided Printing Settings - Windows
- Selecting Additional Layout and Print Options - Windows
- Selecting a Printing Preset - Windows
- Selecting Extended Settings - Windows
- Printing Your Document or Photo - Windows
- Locking Printer Settings - Windows
- Selecting Default Print Settings - Windows
- Changing Automatic Update Options
- Printing with the Built-in Epson Driver - Windows 10 S
- Printing on a Mac
- Printing From a Chromebook
- Cancelling Printing Using the Product
- Printing with Windows
- Scanning
- Refilling Ink
- Adjusting Print Quality
- Cleaning and Transporting Your Product
- Solving Problems
- Checking for Software Updates
- Product Status Messages
- Message Appears Prompting You to Reset Ink Levels
- Running a Product Check
- Resetting Control Panel Defaults
- Solving Setup Problems
- Solving Network Problems
- Solving Copying Problems
- Solving Paper Problems
- Solving Problems Printing from a Computer
- Solving Page Layout and Content Problems
- Solving Print Quality Problems
- Solving Scanning Problems
- Solving Scanned Image Quality Problems
- Image Consists of a Few Dots Only
- Line of Dots Appears in All Scanned Images
- Straight Lines in an Image Appear Crooked
- Image is Distorted or Blurry
- Image Colors are Patchy at the Edges
- Image is Too Dark
- Back of Original Image Appears in Scanned Image
- Ripple Patterns Appear in an Image
- Scanned Image Colors Do Not Match Original Colors
- Scanned Image Edges are Cropped
- Uninstall Your Product Software
- Where to Get Help
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Scanning Specifications
- Automatic Document Feeder (ADF) Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Notices
137
4. Hold the ink bottle upright and slowly turn the bottle cap to remove it.
Caution: Do not shake or squeeze the bottle. Do not touch the top of the bottle after its cap is
removed.
Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes,
flush them immediately with water. If ink gets into your mouth, spit it out immediately. Seek medical
advice if problems persist. Keep the ink bottles out of the reach of children and do not drink the ink.
5. Position the top of the ink bottle along the slot in front of the filling port, then slowly stand the bottle
up to insert it.
Note: Refer to the color-coded sticker on the ink tank unit to identify the color of each tank. Do not
force the bottles into position; they are keyed for each color.