User manual

Follow the on-screen instructions. e necessary soware is installed.

Connecting to a Smart Device

You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the

smart device. To use the printer from a smart device, set up from the following website. Access to the website from

the smart device that you want to connect to the printer.

http://epson.sn > Setup

Note:

If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the

computer

rst.

Making Wi-Fi Settings from the Control Panel

You can make network settings from the printer's control panel. Aer connecting the printer to the network,

connect to the printer from the device that you want to use (computer, smart phone, tablet, and so on.)

Related Information

& “Making Wi-Fi Settings by Push Button Setup” on page 18

& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 19

Making Wi-Fi Settings by Push Button Setup

You can automatically set up a Wi-Fi network by pressing a button on the access point. If the following conditions

are met, you can set up by using this method.

❏ e access point is compatible with WPS (Wi-Fi Protected Setup).

❏ e current Wi-Fi connection was established by pressing a button on the access point.

Note:

If you cannot nd the button or you are setting up using the soware, see the documentation provided with the access point.

1. Hold down the [WPS] button on the access point until the security light

ashes.

If you do not know where the [WPS] button is, or there are no buttons on the access point, see the

documentation provided with your access point for details.

User's Guide

Network Settings