User Manual
B
Display the Printer Settings tab of the printer
driver and select Auto Sheet Feeder in Source.
U “Basic Operating Procedures (Windows)”
on page 46
C
Display the Layout tab of the printer driver and
select the 2-sided printing check box.
Note:
❏ If you click Margin Setting, you can set
Binding Edge and Binding Margin. Perform
a test print because the set binding margin
width and the actual print result may dier
depending the application used.
❏ Selecting the Folded Booklet check box
enables printing to make a booklet. In the
example in the gure below, the pages that
will be on the inside when the paper is folded
into two (pages 2, 3, 6, 7, 10, and 11) are
printed rst.
D
Check other settings, and then start printing.
E
When the guide screen appears aer printing of
the odd pages is
nished,
load the paper again
following the instructions on the screen and
then click Resume.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Printing with the Printer Driver from Your Computer
81