User Manual

Printing CAD Drawings
ere are the following two methods to print CAD
drawings.
Printing with the printer driver
is method is best suited for printing CAD drawings
such as the appearance views of buildings at high
quality.
is
section describes the procedure to print
using the printer driver from AutoCAD 2018.
c
Important:
If lines or parts in your drawing are not printed
properly, print using the HP-GL/2 or HP RTL
mode.
Printing using the HP-GL/2 or HP RTL mode
is method is best suited for printing CAD and GIS
drawings such as maps and blueprints.
You can print from an application that supports
HP-GL/2 (compatible with HP Designjet 750C) and
HP RTL. See the following for more details.
U “Printing Using the HP-GL/2 or HP RTL Mode
from a Computer” on page 91
A
Open the data to be printed and then click Plot.
B
Select the printer in Printer/plotter and then
click Properties.
C
Click Custom Properties.
e printer driver's dialog box for this printer
appears.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Printing with the Printer Driver from Your Computer
57