User manual

❏ Paper Conguration

Automatically displays the paper settings screen when paper is loaded. Disable this feature if you

always load the same size of paper and you do not want to make paper settings every time you load

paper. AirPrint is not available when this is disabled. Also, the printer does not warn you even if the

paper settings do not match the paper you loaded.

Stickers

Adjusts the printing position of a photo sticker by moving up, down, le, or right to t.

Quiet Mode

Reduces the noise the printer makes, however, this may reduce print speed. Depending on the paper

type and print quality settings you selected, there may be no dierence in the printer's noise level.

Power

O

Timer

Automatically turns the printer o if no operations are performed for a set time period. You can adjust

the time before power management is applied. Any increase will aect the printer’s energy eciency.

Please consider the environment before making any change.

Sleep Timer

Select the time period before the printer enters sleep mode (energy saving mode) when no operations

are performed. e LCD screen turns black when the set time passes.

Language

Select the display language.

Menu Options for Network Settings

Select the menus on the control panel as described below.

Setup > Network Settings

Print Status Sheet

Prints a network status sheet.

Wi-Fi Setup

See the Network Guide to make the following settings.

❏ Wi - Fi S e tup Wi z a r d

Select a SSID, enter a password, and then connect the printer to a wireless (Wi-Fi) network.

❏ Push Button (WPS)

Connects the printer to a wireless (Wi-Fi) network by pressing a WPS push button on a wireless

router.

❏ PIN Code (WPS)

In the wireless router utility, enter the PIN code displayed on the printer's screen to connect the

printer to a wireless (Wi-Fi) network.

❏ Wi - Fi Aut o C on ne c t

User's Guide

Menu Options for Setup Mode