User Manual

The printer turned off due to a power
cut
o
Turn off the printer, and then turn it back on.
When the printer is not turned off normally, the print
head may not be capped correctly. If the print head is
left uncapped for a long time, the print quality may
decline.
When you turn on the printer, capping is performed
automatically after a few minutes.
Also, if the printer is turned off during calibration, data
transmission and writing adjustment values may not
be performed correctly. Turn on the printer, and then
check Calibration Date from the Printer Status menu.
When the date is initialized, the adjustment values are
also initialized.
Exit Epson Color Calibration Utility, and then restart.
The adjustment values are automatically restored.
U “Printer Status” on page 121
U "Epson Color Calibration UtilityUser's Guide"
(PDF)
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Problem Solver
155