Instruction manual

Display That means ... Cause / Action
27
MC OK Fault on Control Unit - Correct the line voltage switch
or - Control Unit defective
Line voltage set to - Type mismatch of PM and
240V not to 115V Control Unit
- PBC (Printer Base Controller)
on Control Unit damaged
- SPC (Speed Controller)
on Control Unit damaged
- Transport lock not removed
Note: OK = Indication for previous test step was OK
If all tests have been passed successfully the following message will be
displayed:
Display That means... Cause / Action
READY 1ELQ The Printer is OK - Printer ready for
(BUSY 1ELQ) operation