Instruction manual

24
Vertical Position Adjustment
Vertical Position Adjustment for cut sheet and page oriented applications
In READY mode the printer provides a quick adjustment for the vertical position
with printjobs using cut sheet or Form Feed commands at the end of every
page. Pressing [V-POS ADJ] enters the adjustment procedure. The selected
value becomes valid as offset starting on top of the next page.
The following sequence of keys show the Vertical Position Adjustment:
KEY Display
1. [INSERT or EJECT] TRACTOR V 0 ’
2. [UP] [[] TRACTOR V - 1 6
3. [UP] [[] TRACTOR V - 2 6
4. [UP] [[] TRACTOR V - 2 ’
5. [START/STOP] READY 1 ELQ
Vertical Position Displacement for fanfold applications
In READY mode the printer provides a quick adjustment for the vertical position
within printjobs using fanfold paper and no Form Feed commands at the end of
every page. Pressing [FANFOLD ADJ] enters the adjustment procedure. The
displacement value performs a vertical shift of the actual print position on the
paper. It is valid until the next Form Feed.
The following sequence of keys show the Fanfold Displacement:
KEY Display
1. [PAPER FEED] FANFOLD DIS. 0
2. [PAPER FEED] FANFOLD DIS. +1
3. [PAPER FEED] FANFOLD DIS. +2
4. [PAPER FEED] FANFOLD DIS. +3
5. [START/STOP] READY 1 ELQ