Instruction manual

for printer CI - 4050 (standard)

S Ensure that the manual front insertion guide (1) is installed.

S Adjust the left hand paper guide (22) as illustrated below. In this setting the

margin has the smallest value possible.

S Adjust the right hand paper guide (23) to the width of the paper to be used.

for both printer

S Select paper source MANUAL by the following sequence of keys:

KEY Display

1. Switch the printer ON READY 1 ELQ

2. [START/STOP] LOCAL

3. [PAPER SOURCE] TRACTOR ’

4. [DOWN] [\] MANUAL 6

5. [RIGHT] [Y] MANUAL ’

If continuous form paper is in print position on the platen and has not been torn

off it will be moved forward and TEAR OFF PAPER will be displayed on the LCD.

Tear off the paper from left to right and press [START/STOP]. Continuous form

paper is placed into the park position and LOAD MANUAL is displayed.

S Insert single sheet evenly. After a short delay the printer draws in the sheet.