Instruction manual

14
S Open the tractor covers (1) and insert the paper.
S Close the tractor covers.
S Move the right tractor until the paper is straight but not too tight.
S Lock the right tractor by pushing back the green lock levers again.
S Refit the manual insertion guide
S Initiate a printout to check the margins. Readjust the tractors until the printer
prints within the desired margins. (Configuration Printout see pages 20 + 21)
KEY Display
1. Switch the printer ON READY 1 ELQ
2. [START/STOP] LOCAL
3. [MENU] MACRO SELECT 6
4. [DOWN] [\] -- [\] INSTALLATION 6
5. [RIGHT] [Y] 7 INTERFACE 6
6. [UP] [[] -- [[] 7 SELF TEST 6
7. [RIGHT] [Y] 7 PRINT TEST 1
Use [DOWN] [\] to select PRINT TEST 2 or 3.
8. [RIGHT] [Y] 7 PRINT TEST 1 *
9. [START/STOP] PRINT TEST 1 *
The printer starts to print using paper from the defined paper source.
To stop the print test:
1. [START/STOP] 7 PRINT TEST 1 *
2. [LEFT] [Z] 7 SELF TEST 6
3. [START/STOP] READY 1 ELQ