Instruction manual

Manual front insertion

guide (option only)

Mounting the Output Stacker (only printer CI - 4050)

There are two rails in the top cover for the two positions of the output stacker:

S for paper with 80 g/m2 or thicker ! left picture

S for thin paper ! right picture

Paper Loading

Tractor:

Inserting Fanfold Paper for the First Time

S Ensure that the printer is placed in the depression on the top of the stand

(option). If the printer is used without a stand, align the printer with the front

edge of the table. The cables at the back of the printer should be tucked into

the cable clips in order not to block the paper path.

Note: (only for printer CI - 4040) If the manual front insertion guide (Option) is

in use, pull it upwards against the resistance and remove by pulling

forward.