Instruction manual

Status ONLINE LOCAL MENU Mode

[Macro 4] [PITCH] [RIGHT]

[Macro 4]

By pressing this key the printer enters into the LOCAL MENU mode.

The selection must be confirmed with [RIGHT] or can be canceled by

pressing the [START/STOP] key. In both cases the printer changes

to the READY mode.

[PITCH]

This key is a shortcut into the menu tree. The position in the menu

tree is immediately PITCH.

[RIGHT]

This key can be used as a cursor to select and save a menu point.

[V-POS ADJ] [INSERT or —

EJECT]

[V-POS ADJ] (Vertical Position Adjustment)

After pressing this key the vertical position can be exactly selected

for the actual macro and paper path. The position is defined as offset

to the actual Top of Form position.The TOP MARGIN and BOTTOM

MARGIN settings are taken into account as well.

The correction is / inch (0.42 mm), where "-" is up the page and "+"

is further down the page. The values can be selected by using the

[UP] and [DOWN] keys like in LOCAL MENU MODE.

The parameter is part of the printer´s configuration set up memory

and can be activated for the runtime with [RIGHT].

For permanent saving of V-POS values the Menu Mode should be

used to store the values in a macro.

[INSERT or EJECT]

After pressing this key, fanfold paper in the park position is fed into

the print position. If fanfold paper is in the print position it is fed into

the cut/tear off position by pressing this key. After the paper has

been teared off, a new print command moves the the fanfold paper

automatically to the print position.