Setup guide

16
Note
If you are using a whiteboard, the image may not fill the entire board, depending on its size and aspect ratio.
4 Connect your computer to the interactive module using the USB cable. If the cable is not long enough
to reach your computer, you may need to use a USB extension cable (not included).
5 Launch the Easy Interactive Driver.
Click the icon in the lower right corner of your screen (Windows
®
) or in the Dock (Mac OS
®
).
6 Select
Calibrate (Normal) or Calibrate (Advanced).
Normal calibration is faster and appropriate for most situations (unless you plan to work with very
detailed images).
7 Follow the instructions on the screen to calibrate. Make sure you touch each dot as it appears.
8 Use the pen as a mouse by tapping it on the projected image.
• For best performance, hold the pen at an angle (like a normal pen), rather than perpendicular to
the board.
• To left-click, tap on the board. Tap twice to double-click.
• To right-click, tap while pressing the button on the pen.
• To click and drag, tap and drag with the pen.
Battery indicator
light
Button