User's Guide

4. Select Save and press Enter.
5. Select the following options for saving as necessary:
• Default Save Location lets you select either USB or Network for saving on a USB thumb drive or
network folder. You can change this setting when you save in whiteboard mode, but not in
annotation mode.
• UNC Address (Universal Naming Convention) lets you set a folder and path in the following
format: \\host name\share name. You can use an IP address or a NetBIOS name as the host
name. You can enter up to 63 alphanumeric characters for the address.
When an IP address is set as the host name, the projector communicates with the file sharing
server using the CIFS protocol. If a routing configuration is used for the TCP protocol, the subnet
is skipped and communication is performed outside the subnet.
When a NetBIOS name is set as the host name, the projector communicates with the file sharing
server using the SMB protocol.
Note: The folder must be on a shared network drive. To save to a folder on a different network
segment, use the WINS server setting on the wired or wireless network menu.
202