Installation Guide

6
2 Specifications
Wall plate
The wall plate is in three piece when shipped, and the middle piece is attached to the wall mount arm. Use the
included M4 x 12 mm bolts (x6) to attach the separate pieces together before mounting the projector. See
page 26 for instructions.
Vertical slide adjustment range
Item Specification Additional information Reference
Page
Wall mount weight (including the
3-axis adjustment unit, slide plate,
wall plate, wall plate cover, and
end cap)
Approx. 16.3 lb
(7.4 kg)
Wall mount: 6.2 lb (2.8 kg)
3-axis adjustment unit: 2.4 lb (1.1 kg)
Slide plate: 1.5 lb (0.7 kg)
Wall plate: 5.5 lb (2.5 kg)
Wall plate cover and end cap: 0.7 lb (0.3 kg)
—
Maximum load capacity 15.4 lb (7 kg) — —
Forward/backward slide
adjustment range
0 to 12.2 in.
(310 mm)
Arm slide adjustment range: 0 to 9.8 in. (248 mm)
Adjustment from 3-axis adjustment unit installation
position: 2.4 in. (62 mm)
Refer to the
illustration
below
Vertical slide adjustment range ± 1.5 in. (38 mm) — Refer to the
illustration
below
Horizontal roll adjustment range ± 3° Fine adjustments possible with adjustment knob
38
Horizontal rotation adjustment
range
± 3° Fine adjustments possible with adjustment knob
39
Vertical tilt adjustment range ± 3° Fine adjustments possible with adjustment knob
39
Horizontal slide adjustment range ± 1.8 in. (45 mm) — Refer to the
illustration
below
4.7 in.
(120 mm)
1.2 in.
(30 mm)
1.3 in.
(33 mm)
2.9 in.
(75 mm)
4.2 in.
(106.5 mm)
3.1 in. (79 mm)
1.6 in.
(40 mm)
4.4 in.
(112 mm)
8.0 in. (203 mm)
6.3 in. (160 mm)
8.4 in. (213 mm)
18 in. (456 mm)
8.7 in. (222 mm)
9.7 in. (246 mm)
1.5 in. (38 mm)
1.5 in. (38 mm)