User's Guide

• Send a test e-mail connects to the SMTP server and sends a test email to the address you set as
the default.
Note: Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote
control to highlight numbers or characters and press Enter to select them. You cannot use spaces in
the User Name and Password fields. You can not use spaces or the following symbols: " * + , : ; < =
> ? [ ] | in the Reply to and From fields.
6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic: Selecting Whiteboard Settings
Related references
Projector Setup Settings - Extended Menu
Related tasks
Selecting Wired Network Settings
Selecting Wireless Network Settings Manually
Inserting a Document or Image From a Scanner
You can scan a paper document into a new page in whiteboard mode. Make sure a supported Epson all-
in-one printer is connected to the control pad (or to your network).
Note: Standalone scanners are not supported.
1. Place your document on the scanner glass or in the automatic document feeder (if available).
Note: You can place up to 10 sheets in the ADF. If you want to scan a longer document, scan the
pages in batches of 10.
2. Select the Scan tool on the bottom toolbar.
205