Installation Guide

35
English
I Connect the power cord and other cables to the projector
Connect any necessary cables such as the power cord, computer cable, HDMI cable, and USB cable to
the projector.
If you are planning to run the cables inside the wall, make sure you follow all local electrical codes. If
you are running the cables outside the wall, use a cable management system to keep the cables from
obstructing the image. An optional cable management system is available from Epson (part #
ELPCK01).
If you connect more than one computer cable or USB cable to the projector, it is a good
idea to label the cables on both ends.
Power cord
Computer cable
USB cable
Power cord
Computer cable
USB cable
BrightLink 475Wi/480i/485Wi and PowerLite 470/475W/480/485W
BrightLink Pro 1410Wi