BrightLink® Pro 1410Wi User's Guide
Contents BrightLink Pro 1410Wi User's Guide ....................................................................................................... 11 Introduction to Your Projector ................................................................................................................. Projector Features.............................................................................................................................. Product Box Contents...................................................
Connecting to a Computer for DisplayPort Video and Audio..................................................... Connecting to a Computer for Pen Use or USB Mouse Control ................................................ Connecting to a Computer for Sound........................................................................................ Connecting a Computer to the Control Pad............................................................................... Connecting to Video Sources ........................
Selecting Wireless Network Settings in Windows.......................................................................... Selecting Wireless Network Settings in Mac OS X ........................................................................ Enabling WPA or EAP Security ..................................................................................................... Wireless Security Menu Settings ..............................................................................................
Changing the Projection Mode Using the Menus......................................................................... Image Aspect Ratio .......................................................................................................................... Changing the Image Aspect Ratio ............................................................................................... Available Image Aspect Ratios ..............................................................................................
Using the Whiteboard Toolbars ................................................................................................... The Main Whiteboard Toolbar ..................................................................................................... Selecting Background Templates................................................................................................ Zooming Images in Whiteboard Mode.........................................................................................
Adjusting the Menu Settings .................................................................................................................. Using the Projector's Menus............................................................................................................. Image Quality Settings - Image Menu .............................................................................................. Input Signal Settings - Signal Menu..................................................................
Solutions When "No Signal" Message Appears........................................................................... 222 Displaying From a PC Laptop ................................................................................................. 222 Displaying From a Mac Laptop ............................................................................................... 222 Solutions When "Not Supported" Message Appears ...................................................................
Projector Lamp Specifications.......................................................................................................... Remote Control Specifications ......................................................................................................... Projector Dimension Specifications.................................................................................................. Control Pad Specifications ................................................................................
BrightLink Pro 1410Wi User's Guide Welcome to the BrightLink Pro 1410Wi User's Guide.
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual.
• Plug-and-play 3-in-1 USB projection, audio, and mouse control for instant setup • Wired and wireless network support for projection and interaction • Projector monitoring and control via remote network computer • PC Free presentations via connected USB memory devices • Port for connecting an external monitor Innovative display and operation features • Low total cost of ownership with long-life projector lamp and high-efficiency air filter • High digital zoom ratio for larger images in shorter projection d
1 Projector 2 Remote control 3 Remote control batteries (two AA alkaline) 4 2 Pens and batteries (one AA alkaline battery for each pen) 5 USB cables 6 Power cord 7 Battery charger with 2 AA rechargeable pen batteries 8 Pen tray 9 Password Protected sticker 10 Projector feet 14
11 Projector software CD-ROM (for network usage) 12 Projector software for Easy Interactive Function CD-ROM 13 Projector documentation CD-ROM 14 Wireless LAN module 15 Control pad and batteries (two AA alkaline) Parent topic: Projector Features Related concepts Projector Connections Related tasks Transporting the Projector Additional Components Depending on how you plan to use the projector, you may need to obtain the following additional components: • To receive a component video signal, you nee
Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Warranty and Registration Information Your projector comes with a basic warranty that lets you project with confidence. For details, see the warranty that came with your projector. In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details.
• For detailed instructions on converting PowerPoint files into a slide show file format that you can display from a USB device connected to your projector (Windows only), see the EasyMP Slide Converter Operation Guide. • If you still need help after checking this manual and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help".
Projector Parts - Front/Top 1 Remote control receiver 2 Speaker 3 Control panel 4 Cable cover screw 5 Cable cover 6 Exhaust vent 7 Lamp cover screw 8 Lamp cover Parent topic: Projector Part Locations 19
Projector Parts - Side 1 Filter cover switch 2 Security cable installation slot 3 Wireless LAN light 4 Interactive pen receiver 5 Obstacle sensor 6 Remote receiver 7 Projection window 8 Security lock port 9 Air filter cover 20
10 Air intake vent (air filter) 11 Focus lever Parent topic: Projector Part Locations Projector Parts - Interface Panel 1 Wireless LAN unit slot 2 Audio port for computer audio 3 Computer port 4 Audio Out port 5 USB-B port for control pad or computer 6 Monitor Out port 7 Network (LAN) port 8 HDMI port 9 DisplayPort port 10 Audio port for specific source set in the Extended menu (Audio Input Setup) 11 RS-232C port 21
12 Power inlet 13 USB-A port for control pad 14 USB-A port for document camera 15 Video port 16 Audio port (for sound from equipment connected to the Video port) 17 Remote port for connecting to the control pad with an optional cable Parent topic: Projector Part Locations Projector Parts - Base 1 Ceiling mount holes (5) 2 Security cable attachment point 3 Rear foot attachment holes (2) 22
4 Wall mount plate holes (4) 5 Front foot attachment hole Parent topic: Projector Part Locations Projector Parts - Control Panel 1 Projector status lights 2 Source Search button (searches for connected video sources) 3 Enter button (selects options) 4 Horizontal/Vertical keystone adjustment buttons (display the adjustment screen) and arrow buttons 5 Help button (accesses projector help information) 6 Esc button (cancels/exits functions) 7 Wide/Tele buttons (adjust projected image size), h
Parent topic: Projector Part Locations Related references Projector Light Status Projector Parts - Interactive Pens 1 Pen tip 2 Attachment for optional strap or cord 3 Battery light 4 Power switch 5 Battery cover Parent topic: Projector Part Locations 24
Projector Parts - Remote Control 1 Power button 2 Capture button (captures projected image in annotation mode) 3 Print button (prints the projected image) 4 Numeric buttons (enter numbers) 5 Auto button (automatically adjusts position, tracking, and sync settings) 6 Aspect button (selects the image aspect ratio) 25
7 Num button (when held down, switches numeric buttons to number function) 8 Menu button (accesses projector menu system) 9 Arrow buttons (move through on-screen options and control wireless mouse functions) 10 Enter button (selects options and controls wireless mouse functions) 11 User button (customizable for different functions; starts auto calibration by default) 12 Page up/down buttons (control presentation slides) 13 E-Zoom +/– buttons (zoom into and out of the image) 14 A/V Mute button
Projector Parts - Pen Tray 1 Wall attachment holes 2 Optional security lock attachment hole Parent topic: Projector Part Locations 27
Projector Parts - Control Pad 1 Power button 2 Whiteboard button (switches to whiteboard mode) 3 Source Search button (searches for connected sources) 4 Capture button (captures projected image in annotation mode) 5 Print button (prints the projected image) 6 Save button (saves the projected image) 7 USB-B port for connecting a computer (on bottom of control pad) 8 USB-A port for connecting a USB thumbdrive or other storage device (under bottom cover) 9 Printer USB-A port for connecting a
13 Light emitting areas (output remote control signals) 14 Bottom cover (open to connect a USB thumbdrive or other storage device) 15 Top cover (open to connect cables or replace batteries) 16 Cable cover (open when cables are wired along a wall) Parent topic: Projector Part Locations 29
Setting Up the Projector Follow the instructions in these sections to set up your projector for use.
Mounted vertically on a table to create an interactive workspace. Front projection from a table or portable cart Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an angle. If you project from a table or portable cart, be sure to select the correct Projection option in the projector's menu system.
Parent topic: Projector Placement Related references Projector Setup Settings - Extended Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings. Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image.
Diagonal image size Min. ceiling height Image width Image height Min. projection Distance from top distance from of image to wall front of projector plate 59 inches 77.5 inches (196.8 cm) 51.5 inches (130.6 cm) 28.9 inches (73.5 cm) 2.6 inches (6.6 cm) 8.5 inches (21.7 cm) 60 inches 78.1 inches (198.3 cm) 52.3 inches (132.8 cm) 29.4 inches (74.7 cm) 2.9 inches (7.3 cm) 8.7 inches (22.0 cm) 70 inches 84.3 inches (214.2 cm) 61.0 inches (155.0 cm) 34.3 inches (87.2 cm) 5.4 inches (13.
Diagonal image size Min. ceiling height Image width Image height Min. projection Distance from top distance from of image to wall front of projector plate 88 inches 103.8 inches (263.7 cm) 70.4 inches (182.9 cm) 52.8 inches (134.1 cm) 12.1 inches (30.8 cm) 11.0 inches (28.0 cm) Parent topic: Projector Placement Installing the Projector Feet To use the projector on a table or cart, you first need to install the feet. You can then use the feet to adjust the image position. 1.
Removing and Attaching the Cable Cover Before you can connect equipment to your projector, you need to remove the cable cover. 1. Remove both of the cable cover screws (screwdriver not included). 2. Slide off the cable cover. To attach the cable cover, slide it into position, then tighten the screws.
• For slide shows or presentations without a computer, you can connect USB devices (such as a flash drive or camera) or an optional Epson document camera. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.
USB Display will slow interactive pen function. For the best performance, VGA, HDMI, or DisplayPort connections are recommended. 1. Turn on your computer. 2. Connect the cable to your projector's USB-B port. 3. Connect the other end to any available USB port on your computer. 4. To use USB Display, do one of the following: • Windows 8: Click EPSON_PJ_UD in the upper right-corner, then select Run EMP_UDSE.exe in the dialog box that appears to install the Epson USB Display software.
Related references Projector Setup Settings - Extended Menu Related tasks Connecting a Computer to the Control Pad Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable. Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options. 1.
1. Connect the HDMI cable to your computer's HDMI output port. 2. Connect the other end to the projector's HDMI port. Parent topic: Connecting to Computer Sources Connecting to a Computer for DisplayPort Video and Audio If your computer has a DisplayPort or Mini DisplayPort connector, you can connect it to the projector using an optional DisplayPort cable. 1. Connect the DisplayPort cable to your computer's DisplayPort or Mini DisplayPort connector. 2.
Connecting the USB cable also lets you set up the remote control to act as a wireless mouse, but you cannot use this feature at the same time you are using the pens with your computer. 1. Connect the USB cable to your projector's USB-B port. 2. Connect the other end to any available USB port on your computer. If you want to use the remote control as a wireless mouse, you need to change the USB Type B setting in the projector's Extended menu.
2. Connect the other end to the Audio port that corresponds to the Computer port you are using. Parent topic: Connecting to Computer Sources Connecting a Computer to the Control Pad If your computer meets the system requirements, you can send video and audio output to the projector through the control pad's USB-B port (preferably USB 2.0). Connect the projector and your computer to the control pad using USB cables. Caution: Make sure the control pad is positioned no more than 6.
3. Connect another USB cable to the USB port on the bottom of the control pad and any available USB port on your computer. 4. To use USB Display, do one of the following: • Windows 8: Click EPSON_PJ_UD in the upper right-corner, then select Run EMP_UDSe.exe in the dialog box that appears to install the Epson USB Display software. • Windows 7/Windows Vista: Select Run EMP_UDSE.exe in the dialog box that appears to install the Epson USB Display software.
Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Connecting to an HDMI Video Source Connecting to a Component-to-VGA Video Source Connecting to a Composite Video Source Connecting to a Video Source for Sound Parent topic: Projector Connections Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality. 1.
2. Connect the VGA connector to the projector's Computer port. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources Related references Input Signal Settings - Signal Menu Optional Equipment and Replacement Parts Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1.
Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. Connect the projector to the video source using a stereo mini-jack adapter cable (with one 3.5 mm miniplug and two RCA plugs). 1. Connect the audio cable to your video source's audio-out ports. 2. Connect the other end of the cable to the projector's Audio port or ports.
2. Connect the external monitor's cable to your projector's Monitor Out port. Parent topic: Projector Connections Connecting to External Speakers To enhance the sound from your presentation, you can connect the projector to external self-powered speakers. You can control the volume using the projector's remote control. If you want to output audio from the external speakers when the projector is turned off, you need to adjust the Standby Mode settings in the projector's Extended menu.
4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port. Parent topic: Projector Connections Related references Projector Setup Settings - Extended Menu Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector.
Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class-compliant.
4. Connect the other end of the cable (if applicable) to your device. Note: You can also connect a USB device directly to the projector's USB-A port. Parent topic: Connecting to External USB Devices Related topics Projecting a PC Free Presentation Selecting the Connected USB Source You can switch the projector's display to the source you connected to the USB-A port on the control pad or the projector. 1. Make sure the connected USB source is turned on, if necessary. 2.
2. Connect the USB cable to the projector's USB-A document camera port. 3. Connect the other end of the cable to the document camera's USB Type B port. Parent topic: Connecting to External USB Devices Related references Optional Equipment and Replacement Parts Connecting a Printer to the Control Pad You can connect a printer or all-in-one device to the Printer port on the control pad and use it to print your projected and annotated content.
3. Connect the other end of the cable to the USB type B port on the printer. Parent topic: Setting Up the Projector Related references Printer and All-in-One Control Command Requirements Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Open the battery cover.
2. Insert the batteries with the + and – ends facing as shown. 3. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Setting Up the Projector Installing Batteries in the Pens Each pen uses one AA battery.
1. Open the battery cover as shown. 2. Insert the battery with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Parent topic: Setting Up the Projector Installing Batteries in the Control Pad The control pad uses two AA batteries.
Note: If you have the optional remote control cable set (ELPKC28), you can use it instead of batteries to power the control pad. 1. Remove the top cover of the control pad by prying it off as shown. 2. Insert the batteries with the + and – ends facing as shown.
3. Replace the cover and press it down until it clicks into place.
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network.
Note the following restrictions on network interactivity: • Pen response may be slower over the network. • You can only use one pen at a time. Parent topic: Using the Projector on a Network Related tasks Connecting to a Network Projector in Windows Wired Network Projection You can send images to your projector through a wired network. To do this, you connect the projector to your network, and then set up your projector and computer for network projection.
2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port. 1. Turn on the projector. 2. Press the Menu button.
3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter.
6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • Web Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed. Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter. 9. Specify a WINS server address for saving images if necessary. 10. To prevent display of the IP address on the standby screen, turn off IP Address Display. 11.
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly using the EasyMP Network Projection software.
2. Unscrew and remove the cable cover if it is attached (screwdriver not included). 3. Insert the wireless LAN module into the port. 4. Replace the cable cover and tighten the screws. 5. Plug in and turn on the projector.
Using Quick Wireless Connection (Windows Only) You can use the optional Quick Wireless Connection USB Key to quickly connect the projector to a Windows computer wirelessly. Then you can project your presentation and remove the key when you are done. 1. Turn on the projector. 2. Connect the USB key to the projector's USB-A port.
4. Now connect the USB key to a USB port on your computer or notebook. Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchU3.exe, then select Allow on the next screen. 5. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yes to disable the firewall. After a few minutes, your computer image is displayed by the projector.
3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter.
6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • Web Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.
Wireless LAN Menu Settings Parent topic: Wireless Network Projection Wireless LAN Menu Settings Note: See your projector's EasyMP Network Projection Operation Guide for details on selecting these settings. Setting Options Description Wireless LAN Power On Turns on wireless LAN support Off Wi-Fi Protected Setup To Setup Wizard Select To Setup Wizard to start the WPS Connection Setup utility Wireless LAN System 802.11b/g Sets the type of wireless LAN system the projector is connecting to 802.
Setting Options Description Search Access Point To Search View Search for available wireless network access points in Advanced connection mode Channel 1ch In Quick connection mode, selects the frequency band (channel) used by the wireless LAN 6ch 11ch SSID Display On Selects whether to display the SSID on the network standby screen Off DHCP On Turns on DHCP if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address
3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Wireless LAN menu and press Enter. 6. Select Advanced as the Connection mode and press Enter.
7. Select To Search View and press Enter. 8. Select the name of the wireless network you want to connect to and press Enter.
9. Select a WPA or EAP setting from the drop-down menu. 10. Select the settings on the security menu as necessary for your network. 11. When you finish selecting settings, select Setup complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wireless Network Projection Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1.
1. Select a WPA or EAP setting from the drop-down menu. 2. Select the settings on the security menu as necessary for your network. 3. When you finish selecting settings, select Setup complete and follow the on-screen instructions to save your settings and exit the menus.
Setting Options Description EAP Method PEAP For WPA/WPA2-EAP security, selects the protocol for authentication PEAP-TLS EAP-TLS EAP-Fast LEAP User name Various user names up to 32 characters For WPA/WPA2-EAP security, selects the user name; automatically detected when using the PEAP-TLS or EAPTLS EAP methods Password Various passwords up to 32 characters For WPA/WPA2-EAP security, selects the password for EAP authentication Client Certificate None For WPA/WPA2-EAP security, displays the certif
Setting Options Verify Exp. date of Server Cert. On Description For WPA/WPA2-EAP security, selects whether to verify the server certificate's validity period during certificate verification Off Parent topic: Enabling WPA or EAP Security Controlling a Networked Projector Using a Web Browser Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely.
1 Power button control 2 Captures the projected image. Switch to whiteboard mode to paste the image into a new page. 3 Prints the projected image. 4 Freeze button control 5 A/V Mute button control 6 Page Up and Page Down button controls 7 Searches for sources 8 Switches to whiteboard mode. 9 Saves the projected image in .png format. 10 Volume button controls 11 Closed Caption control 7. Select the icon corresponding to the projector function you want to control.
Adding Templates from a Web Browser You can use a web browser to add templates for use in Whiteboard mode. You can add up to 5 images, which must be in .png format to be used as templates. 1. Make sure the projector is turned on. 2. Start your web browser on a computer connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Web Control screen and a prompt to enter a user ID and password. 4.
Parent topic: Using the Projector on a Network Related tasks Selecting Background Templates Registering a Digital Certificate on the Projector Follow the instructions here if you need to install a digital certificate on the projector to provide security for your presentation files. Note: You can register a digital certificate over a network or from a connected USB device. However, be sure to register just once from either a USB device or network, or the certificate may not install correctly.
5. Enter the following information in uppercase or lowercase letters, exactly as shown: • For the user ID, enter EPSONWEB. (You cannot change the user ID.) • For the password, enter the default password admin. (You can change the Web Control password using the projector's Network menu.) 6. Under Network, select the Administrator Settings option and select Manage Certificates. You see a screen like this: 7. Click the Browse button, select the certificate file, and click Open. 8.
Specification Description Format PKCS#12 Extension PKCS, P12 Encryption RSA Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512 Key length 512/1024/2048/4096 bit Password Up to 32 alphanumeric characters; required Server Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-Fast) Specification Description Format X509v3 Extension DER/CER/PEM Encryption RSA Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512 Key length 512/1024/2048/4096 bit Encoding BASE64/Binary Web Server Certificate (Secure HTTP) Specification De
Parent topic: Registering Digital Certificates from a Web Browser Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Administrator Settings menu and press Enter, then select Mail Notification and press Enter. 5. Enter the IP address for the SMTP Server option.
7. Choose an Email Address field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses. Note: Your e-mail address can be up to 32 alphanumeric characters long. 8. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to save your settings and exit the menus. Note: If a critical problem causes the projector to shut down, you may not receive an e-mail alert.
4. Select the Administrator Setting menu and press Enter, then select the SNMP menu and press Enter. 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 6. Enter the community name of SNMP (up to 32 single-byte alphanumeric characters). 7.
For additional information on Crestron RoomView, contact Crestron. Setting Up Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Parent topic: Using the Projector on a Network Setting Up Crestron RoomView Support To set up your projector for monitoring and control using a Crestron RoomView system, make sure your computer and projector are connected to the network. If you are connecting wirelessly, set up the projector using the Advanced network connection mode.
6. When you finish selecting settings, select Complete or Setup Complete and follow the on-screen instructions to save your settings and exit the menus. 7. Turn off the projector, then turn it on again to enable the setting. Parent topic: Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1.
5. To view information about the projector, click the Info tab. 6. To change projector, Crestron, and password settings, click the Tools tab, select settings on the displayed screen, and click Send. 7. When you finish selecting settings, click Exit to exit the program.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features.
The projector beeps and the power light flashes green as the projector warms up. After about 30 seconds, the power light stops flashing and turns green. Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children and pets. If you do not see a projected image right away, try the following: • Turn on the connected computer or video device. • Insert a DVD or other video media, and press the play button (if necessary).
Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off frequently may shorten the life of the lamp. 3. To transport or store the projector, make sure the power light is orange (but not flashing), then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange.
Parent topic: Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust the image height using the projector's adjustable feet. Make sure the feet have been installed. Caution: Tilting the projector will distort the image shape and may cause difficulty focusing the image. Do not tilt the projector at an angle of more than 1.5º. 1. Turn on the projector and display an image. 2.
4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related concepts Image Shape Related references Projector Setup Settings - Extended Menu Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level.
Note: The horizontal and vertical correction angle should be no more than ± 3º, with keystone correction up to ± 6. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen. 3. Press a keystone button on the projector's control panel to adjust the image shape.
Note: The horizontal keystone adjustment buttons are labeled Wide and Tele. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the Keystone settings in the projector menus.
3. Select the Settings menu and press Enter. 4. Select the Keystone setting and press Enter. 5. Select the Quick Corner setting and press Enter. Then press Enter again. You see the Quick Corner adjustment screen.
6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc.
Parent topic: Image Shape Resizing the Image with the Wide and Tele Buttons 1. Turn on the projector and display an image. 2. To enlarge the image size, press the Wide button on the projector's control panel. 3. To reduce the image size, press the Tele button. After you adjust the image size, the Image Shift screen is displayed automatically. Note: If the projector is installed out of reach, you can also adjust the image size with the remote control using the Zoom setting in the projector menus.
1. Turn on the projector and display an image. 2. Adjust the image size using the Wide and Tele buttons. After you adjust the image size, the Image Shift screen is displayed automatically. 3. Use the arrow buttons on the projector or remote control to adjust the image position. Note: You can also use the Settings menu to adjust the Image Shift.
Focusing the Image 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. Slide the switch to open the air filter cover on the side of the projector. 3. Raise or lower the focus lever to sharpen the image.
1 19.7 feet (6 m) 2 ± 30º 3 ± 55º 4 ± 60º 5 ± 15º Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can control projection at a distance from the computer. Note: This feature cannot be used at the same time as the interactive pens. If you want to use the remote control as a wireless mouse, you need to change the USB Type B setting in the projector's Extended menu. 1. Connect the projector to a computer using the projector's USB-B, Computer, HDMI, or DisplayPort port to display video. 2.
Related references Projector Setup Settings - Extended Menu Using the Remote Control as a Pointer You can use the projector's remote control as a pointer to help you call out important information on the screen. The default pointer shape is an arrow, but you can select an alternative shape using the Settings menu. 1. Press the Pointer button on the remote control. 2. Use the arrow buttons on the remote control to move the pointer on the screen. 3. Press Esc to clear the pointer from the screen.
1. Make sure the connected image source you want to use is turned on. 2. For video image sources, insert a DVD or other video media and press its play button (if necessary). 3. Press the Source Search button on the projector, remote control, or control pad, then select the source you want.
Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a wall or ceiling mount. This mode should also be used when you mount the projector vertically on a table to create an interactive work surface. • Front lets you project from a table in front of the screen.
The image disappears briefly and reappears flipped top-to-bottom. 3. To change projection back to the original mode, hold down the A/V Mute button for five seconds again. Parent topic: Projection Modes Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4.
Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen by pressing a button on the remote control. If you always want to use a particular aspect ratio for a certain video input source, you can select it using the projector's menus.
Parent topic: Image Aspect Ratio Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source. Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal. Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal and the Resolution setting.
Parent topic: Using Basic Projector Features Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from a DVD player or other video source, insert a disc or other video media and press the play button, if necessary. 3. Press the Color Mode button on the remote control to change the Color Mode.
Color Mode Description sRGB Best for standard sRGB computer displays Blackboard Best for presentations onto a green chalkboard (adjusts the colors accordingly) Whiteboard Best for presentations onto a whiteboard (adjusts the colors accordingly) DICOM SIM Best for projecting X-rays and other medical images (shows clear shadows) Customized Best for customizing a color mode using manual Color Adjustment settings in the Image menu Note: The projector is not a medical device and cannot be used for me
3. Select the Image menu and press Enter. 4. Select the Auto Iris setting and select On. Note: You can turn Auto Iris on or off for each Color Mode that supports the feature. You cannot change the Auto Iris setting when you are using a Closed Caption setting. 5. Press Menu or Esc to exit the menus. Parent topic: Color Mode Controlling the Volume with the Volume Buttons The volume buttons control the projector’s internal speaker system or any external speakers you connected to the projector.
2. To lower or raise the volume, press the Volume buttons on the remote control. A volume gauge appears on the screen. 3. To set the volume to a specific level for an input source, use the projector menus. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Projecting a PC Free Presentation You can use your projector's PC Free feature whenever you connect a USB device that contains compatible presentation files.
instead. You may not be able to use the security features on certain USB storage devices with PC Free features. Graphic and Text File Formats File contents File type (extension) Details Image .jpg Make sure the file is not: • CMYK format • Progressive format • Highly compressed • Above 8192 × 8192 resolution • Over 12MB in size • Named with a .jpeg extension .bmp Make sure the file resolution is not above 2048 × 2048 .
File type (extension) Movie codec Audio codec Recording quality .mpg MPEG-2 MPEG-1 Layer 1/2 Maximum bit rate: 12 Mbps You can play back audio from MPEG contents. Maximum resolution: 1280 × 720 You cannot play back audio from Linear PCM and AC-3 content. Make sure the file is not named with an .mpeg extension. .mp4 MPEG-4 ASP MPEG-4 AAC-LC MPEG-4 AVC .wmv WMV9 WMA .
2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter. • To view additional images in a folder, highlight Next page or Previous page and press Enter. 3.
• To play a movie, press the arrow buttons to select the movie file and press Enter. Press Enter again to pause the movie and display a list of other buttons for controlling playback. Note: If any file names are longer than 8 characters or include unsupported symbols, the file names may be shortened or changed only in the screen display. 4. While projecting, use the following commands to control the display as necessary: • To move to the next or previous image, press the left or right arrow button.
Note: You cannot do the following while presenting a PDF file from a USB device: • Release a password • Display e-signatures, transparent effects, 3D artwork, or comments • Play multimedia content Slideshow Display Options Parent topic: Projecting a PC Free Presentation Related tasks Selecting an Image Source Disconnecting a USB Device From the Control Pad or Projector Slideshow Display Options You can select these display options when using the projector's Slideshow feature.
Setting Options Description Continuous Play On Displays a slide show continuously Off Displays a slide show one time through Screen Switching Time No Does not display the next file automatically 1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically; high resolution images may switch at a slightly slower rate Effect Wipe Transitions between images with a wipe effect Dissolve Transitions between images with a dissolve effect Random Transitio
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Creating a User Pattern to Display Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation.
Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it. Note: You can also stop video action using the interactive pens. 1. Press the Freeze button on the remote control to stop the video action. 2. To restart the video action in progress, press Freeze again.
1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. 2. Use the following buttons on the remote control to adjust the zoomed image: • Use the arrow buttons to position the crosshair in the image area you want to zoom into. • Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary. • To pan around the zoomed image area, use the arrow buttons.
Installing a Security Cable Parent topic: Adjusting Projector Features Password Security Types You can set up these types of password security using one shared password: • Power On Protect password prevents anyone from using the projector without first entering a password. • User's Logo Protect password prevents anyone from changing the custom screen the projector can display when it turns on or when you use the A/V Mute feature.
3. Select Yes and press Enter. 4. Hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt. 5. Enter the password again. You see the message "Password accepted." 6. Press Esc to return to the Password Protect menu. 7. Make a note of the password and keep it in a safe place in case you forget it.
If you do not see this menu, hold down the Freeze button on the remote control for five seconds until the menu appears. 1. To prevent unauthorized use of the projector, select Power On Protect, press Enter, select On, press Enter again, and press Esc. 2. To prevent changes to the User's Logo screen or related display settings, select User's Logo Protect, press Enter, select On, press Enter again, and press Esc. 3.
1. Hold down the Num button on the remote control while you enter the password using the numeric buttons. The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again. Enter the correct password to proceed. • If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support.
2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter. You see a selection box overlaying your image. 5. Use the arrow buttons on the remote control to surround the image area you want to use as the User's Logo and press Enter. You see a prompt asking if you want to select this image area. 6. Select Yes and press Enter.
7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished. You see a completion message. 9. Press Esc to exit the message screen. 10. Select the Extended menu and press Enter. 11. Select Display and press Enter. 12.
1. Press the Menu button. 2. Select the Settings menu and press Enter. 3. Select the Control Panel Lock setting and press Enter. 4. Select one of these lock types and press Enter: • To lock all of the projector's buttons, select Full Lock. • To lock all buttons except the power button, select Partial Lock. You see a confirmation prompt. 5. Select Yes and press Enter.
• Use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture. Parent topic: Projector Security Features Creating a User Pattern to Display You can transfer an image to the projector and then display it as a pattern to aid in presentations when you use the Pattern Display feature.
2. Press the Menu button, select the Settings menu, and press Enter. 3. Select the Pattern setting and press Enter. 4. Select the User Pattern setting and press Enter. You see a prompt asking if you want to use the displayed image as a User Pattern. 5. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished. You see a completion message. 6.
Using the Interactive Pens Follow the instructions in these sections to use the interactive pens. Three Interactive Modes Using the Pens Whiteboard Mode Annotation Mode (PC-Free) Splitting the Screen Computer Interactive Mode Windows Pen Input and Ink Tools Three Interactive Modes The BrightLink interactive pens turn any wall into an interactive whiteboard, either with or without a computer.
Using the Pens Your projector came with a blue pen and an orange pen, identified by the color on the end of the pen. You can use either pen, or both at the same time (one of each color). Make sure the pen batteries are installed. Note: The pens turn off automatically after 20 minutes of inactivity. Slide the switch to turn the pen back on. 1 Pen tip 2 Attachment for optional strap or cord 3 Battery light 4 Power switch 5 Battery cover 1. To turn on the pen, slide the power switch.
2. Do the following to use the pen as a mouse: • To left-click, tap the board. • To double-click, tap twice. • To right-click, press the board with the pen for about 3 seconds. • To click and drag, tap and drag with the pen. • To move the cursor, hover over the board without touching it. Note: If you do not want to use the hovering feature, you can turn it off using the Easy Interactive Function in the projector's Extended menu. 3. When you are finished using the pen, slide the power switch to turn it off.
Note: You can start Auto Calibration by pressing the User button on the remote control or by pressing the Menu button on the remote control as described here. 1. Press the Menu button, select the Extended menu, and press Enter. 2. Select the Easy Interactive Function setting and press Enter.
3. Select Auto Calibration and press Enter. 4. Adjust the focus if necessary, by opening the cover on the side of the projector and sliding the focus lever. 5. Press Enter to select Yes. A pattern appears then disappears, and the system is calibrated. If you see a message that calibration failed, you need to calibrate manually. The cursor location and pen position should match after calibration. If not, you may need to calibrate manually.
1. Press the Menu button, select the Extended menu, and press Enter. 2. Select the Easy Interactive Function setting and press Enter.
3. Select Manual Calibration and press Enter. 4. Adjust the focus if necessary, by opening the cover on the side of the projector and sliding the focus lever. 5. Press Enter to select Yes. A flashing green circle appears in the upper left corner of your projected image. 6. Touch the center of the circle with the tip of the pen. The circle disappears, and you see another circle below the first one. Note: For the most accurate calibration, make sure you touch the center of the circle.
7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next circle appears at the top of a new column. Note: Make sure you are not blocking the signal between the pen and the interactive receiver (next to the projection window on the projector). If you make a mistake, press the Esc button on the remote control to go back to the previous circle. To restart the calibration process, press and hold the Esc button for 2 seconds. 8.
Whiteboard Mode You can use the pens to write or draw on the projection surface just as you would on a chalkboard or dry erase board.
2. To move the main toolbar to the other side of the screen, select the arrow. Note: You can use the pen to move the arrow up or down. 3. To add a new page, select the New page icon on the bottom toolbar. Your current page appears as a thumbnail image on the bottom toolbar. 4. To close the main toolbar, select the icon at the bottom of the toolbar. Note: If you want to hide the toolbar automatically after drawing, select the the toolbar. 5.
The Main Whiteboard Toolbar The main whiteboard toolbar lets you draw, write, and insert images and backgrounds. The toolbar also lets you easily switch to annotation or computer interactive mode.
Insert a background pattern or template Zoom into and out of image Crop or trim an inserted image Select an inserted image to move, resize, or rotate Insert a .jpg or .
Close the toolbar Parent topic: Whiteboard Mode Selecting Background Templates In whiteboard mode, you can insert horizontal lines, a graph-paper grid, or other background template. You can select from 10 preinstalled patterns. In addition, you can add 5 custom template patterns by accessing the projector through your web browser. Once your custom template patterns are registered, you can place them on your whiteboard pages whenever you want. 1.
1. Select the Zoom tool. 2. Do one of the following to adjust the image if necessary: • Select the icon to enlarge the image. • Select the icon to shrink the image. • Select the icon to return to the original size. • Select the icon to pan around the enlarged area. Parent topic: Whiteboard Mode Inserting and Working With Images In whiteboard mode, you can use the Insert tool to insert an image from a thumbdrive or a network folder. Images can be in .png or .
• To crop the image, select the Trim tool, then drag the corner of the image. Parent topic: Whiteboard Mode Using the Shapes Tool You can add a variety of shapes to your projected image and select the color and line width. 1. Select the Shapes tool. The Shapes box opens: 2. Select the line width, color, and shape you want to create, or select the own shape. Line tool to define your 3. Drag the pen on the projection surface to draw the shape you want.
2. Select the line width and color you want to use for the Pen or Highlighter tools. 3. Select the or tool, then use the pen to write or draw on the projection surface. Parent topic: Whiteboard Mode The Bottom Whiteboard Toolbar The bottom whiteboard toolbar lets you add scanned or imported images, and view, save, print, or email your pages. Show or hide bottom toolbar Start a new meeting or whiteboard session Open a .jpg, .png, or .pdf file from a thumbdrive or network folder.
Open a new page. The current page appears as a thumbnail on the bottom toolbar.
Selecting Basic Whiteboard Settings and Policies You can select the whiteboard features you want to use and control the way whiteboard pages are saved in the projector. 1. Press the Menu button on the remote control. 2. Select the Extended menu and press Enter. 3. Select Whiteboard Settings and press Enter.
4. Select Basic and press Enter. 5. Select the following basic options as necessary: • Administrator Password lets you enter a password up to 16 alphanumeric characters long for controlling whiteboard settings. This password is also used for network settings. • Clock Display Settings lets you control the date and time display on the bottom whiteboard toolbar. • Delete All Internal Data lets you delete data stored in the projector.
6. Select the Policy menu and press Enter. 7. Select the following policy options as necessary: • Policy Setting options let you disable capturing, printing, scanning, USB storage, network storage, or emailing from the projector. All features are enabled by default. • Internal Storage settings let you control the use of the projector's internal storage. In most cases, you should leave this setting On, and select Retain for saved data.
2. Select the Extended menu and press Enter. 3. Select Whiteboard Settings and press Enter. 4. Select Print and press Enter.
5. Select the following printing options as necessary: • Default Printer lets you select either USB or Network for the printer connection. You can change this setting when you print in whiteboard mode, but not in annotation mode. • Paper Size lets you select either Letter or A4 as the default paper size. • Network Printer Settings let you enter the IP address for a printer connected to the same network as the projector.
2. Select the Extended menu and press Enter. 3. Select Whiteboard Settings and press Enter. 4. Select Save and press Enter.
5. Select the following options for saving as necessary: • Default Save Location lets you select either USB or Network for saving on a USB thumb drive or network folder. You can change this setting when you save in whiteboard mode, but not in annotation mode. • Network Folder Settings let you enter a network folder name, user name, and password for saving whiteboard pages.
2. Select the Extended menu and press Enter. 3. Select Whiteboard Settings and press Enter. 4. Select Mail and press Enter.
5. Select the following options for emailing as necessary: • SMTP Server lets you enter the mail server address for sending emails from the projector. If you don't know this information, check with your IS department or ISP. • Port Number lets you enter a port number for the SMTP server. The default port is 25. • Reply to lets you enter an email address to use when an error occurs while sending an email. You can enter up to 64 alphanumeric characters.
3. Select the following settings: • Select Color or Monochrome • Select the orientation for the scanned document. • Under ADF, select On if you placed your document in the automatic document feeder. 4. Select Advanced to access additional options. 5. Select Scan on the Scan screen. After a moment, you see your document or image on the screen. Note: Multi-page documents appear on multiple whiteboard pages.
2. Select the location where you want to save your file, then select OK. You see a screen like the following: 3. To enter a file name, select the File Name text box. The on-screen keyboard appears. 4. Use the keyboard to enter a file name, then select OK. 5. Select the location where you want to save the file. 6. Select the format for saving. If you choose PDF, you can encrypt the file and add a password. 7.
Working With Thumbnail Pages Thumbnail pages are displayed on the bottom toolbar in whiteboard mode. You can scroll through your pages with the pen, select a page to display at full size, and copy or delete individual pages. The 5 rectangles in the center of the bottom toolbar shown here are thumbnail pages: 1. To display a page at full size, select its thumbnail. 2. To scroll through the thumbnail pages, select the next page. to move to the previous page or to move to 3.
2. Select the number of copies and whether you want to print in color or black only (monochrome). 3. Select one of the following under Range: • All to print all the pages in the current whiteboard session • Current to print only the current whiteboard page • Range if you want to print selected pages. Tap the numbers in the boxes to select the range of pages. 4. To make additional settings, select Advanced. 5.
Your page or pages are printed. Parent topic: Whiteboard Mode Related references Printer and All-in-One Control Command Requirements Related tasks Selecting Whiteboard Print Settings Printing in Annotation Mode Emailing Your Whiteboard Pages If your projector is set up on your network, you can email your pages directly from the projector. Note: Mail server settings must be configured before you can email from the projector.
5. Use the on-screen keyboard to enter a file name for the attachment. 6. Select the file format for emailing. If you choose PDF, you can encrypt the file and add a password. 7. Select any of the following under Range: • All to send all the pages in the current whiteboard session (available for PDF format only) • Current to send only the current whiteboard page • Selection if you want to send a range of pages (available for PDF format only). Tap the numbers in the boxes to select the range of pages. 8.
3. To move the main toolbar to the other side of the screen, select the arrow. Note: You can use the pen to move the arrow icon up or down. 4. To switch to one of the other modes, do one of the following: • To switch to whiteboard mode, select the • To switch to computer interactive mode, select 5. To close the main toolbar, select the Whiteboard tool. , then select . icon at the bottom of the toolbar. Note: If you want to hide the toolbar automatically after drawing, select the the toolbar. 6.
Related references The Main Annotation Toolbar The Bottom Annotation Toolbar The Main Annotation Toolbar The main annotation toolbar lets you draw and write on your projected image. The toolbar also lets you easily switch to whiteboard or computer interactive mode.
Switch to whiteboard mode Undo the last annotation Redo the last undo Freeze or continue video action Zoom into and out of the projected image. You can move the zoomed area by dragging it with the pen.
Close the toolbar Switch modes. Select interactive). Select then then to switch to computer interactive mode (PC to switch back to annotation mode (PC-free annotation). Parent topic: Annotation Mode (PC-Free) Zooming Images in Annotation Mode You can use the pen to zoom in on a portion of your image, the same as you can using the E-Zoom button on the remote control. 1. Select the Zoom tool. You see a crosshair on the screen indicating the center of the enlarged area. 2.
Show or hide bottom toolbar Capture the projected image. Switch to whiteboard mode to paste the image onto a new page. Print the projected image Save the projected image in .png format Split the screen and project two images. When the screen is split, select the tool again to return to a single image.
Saving Images in Annotation Mode You can save your images as .png files in the default location set in the projector's menu system. 1. Press the Save button on the control pad or remote control, or select the bottom annotation toolbar. Save tool on the You see a confirmation message. 2. Select Yes. Your image is named and saved automatically.
3. Select Source and press the Enter button. You see a screen like the following: 4. Select the source you want to use for the right half of the screen. If you want to write on a blank screen, select any unused source. 5. Select Execute, then press the Enter button.
6. Do any of the following as necessary: • To change to a different source at any time, press the Menu button on the remote control, select Source, then select the source you want. • To annotate on the right screen, press the Menu button on the remote control, select Target Pen Mode, then select Screen Right. Set the Pen Mode setting to PC Free Annotation. • To use computer interactive mode on the right screen, press the Menu button on the remote control, select Target Pen Mode, then select Screen Right.
Note: To use computer interactive mode wirelessly, you need to install Easy MP Network Projection software, version 2.81 (or later), or Quick Wireless version 1.31 (or later).
1. Project your computer's desktop. 2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the Easy Interactive Function setting and press Enter.
4. Select Advanced and press Enter. 5. Select Manual Adj. Pen Area and press Enter. 6. Press Enter to select Yes. The mouse pointer moves toward the top left corner. 7. When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the pen. The mouse pointer moves toward the bottom right corner. 8. When the mouse pointer stops at the bottom right corner of the image, touch the tip of the pointer with the pen.
Windows Pen Input and Ink Tools If you are using Windows 8, Windows 7, or Windows Vista, you can use the pen input and Ink tools to add handwritten input and annotations to your work. Note: These features are not available when you are projecting from a LAN source.
3. Select Number of Pen Users and press Enter. 4. Select One User and press Enter. 5. Press Esc on the remote control to return to the Easy Interactive Function screen. 6. Select Pen Operation Mode and press Enter. 7. Select Pen and press Enter. Parent topic: Windows Pen Input and Ink Tools Using Windows Pen Input and Ink Features If you are using Windows 8, Windows 7, or Windows Vista, you can add handwritten input and convert it to text.
• To open the Tablet PC input panel in Windows 7 or Windows Vista, select Accessories > Tablet PC > Tablet PC Input Panel. > All Programs > You can write in the box using the pen, then select from a variety of options to edit and convert the text. • To add Ink annotations in Microsoft Office applications, select the Review menu, then select Start Inking. Note: In Microsoft Word or Excel, select the Insert tab and then click on Start Inking.
Parent topic: Windows Pen Input and Ink Tools 175
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings.
2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4. Press the up or down arrow button to move through the settings. 5. Change the settings using the buttons listed on the bottom of the menu screens. 6. To return all the menu settings to their default values, select Reset. 7.
To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description Advanced Various options available Adjusts the gamma levels and intensity of individual hues in the image Auto Iris On Adjusts the projected luminance based on the image brightness when certain Color Modes are selected Off Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness mode, use the Power Consumption setting.
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control. To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description HDMI Video Range Normal Sets the video range to match the setting of the device connected to the HDMI input port Expanded Auto Auto: detects the video range automatically Expanded: normally for images from a computer; can also be selected if the image is too dark Normal: normally for images from a device other than a computer; can also be selected if the black areas of the image are too bright DisplayPort Video Range Normal Expanded Auto DisplayPort EQ 1 Adjusts the i
Setting Options Description Video Signal Auto Specifies the signal type from the input sources connected to the video ports Various video standards Auto: detects signals automatically Aspect See the list of available aspect ratios Sets the aspect ratio (width-toheight ratio) for the selected input source Overscan Auto Changes the projected image ratio to make the edges visible by a selectable percentage or automatically Off 4% 8% Parent topic: Adjusting the Menu Settings Related references Avai
Setting Options Description Keystone H/V Keystone Adjusts image shape to rectangular (horizontally and vertically) Quick Corner H/V Keystone: lets you manually correct horizontal and vertical sides Quick Corner: select to correct image shape and alignment using an on-screen display Split Screen Screen Size Source Swap Screens Divides the viewing area horizontally and displays two images side-by-side (press Esc to cancel split screen display) Audio Source Zoom Varying levels available Adjusts the
Setting Options Description Power Consumption Normal Selects the brightness mode of the projector lamp ECO Normal: sets maximum lamp brightness ECO: reduces lamp brightness and fan noise, and saves power and lamp life Volume Varying levels available Adjusts the volume of projector’s speaker system or external speakers Remote Receiver Front Limits reception of remote control signals by the selected receiver; Off turns off all receivers Rear Front/Rear Off User Button Power Consumption Info Prog
Setting Options Description Pattern Pattern Display Selects various pattern display options Pattern Type User Pattern Test Pattern Pattern Display: lets you display the selected pattern type on the screen to aid in presentation Pattern Type: selects the type of grid or line pattern to display User Pattern: captures a projected screen and saves it as a pattern for display Test Pattern: displays a test pattern to assist in focusing and zooming the image and correcting image shape Parent topic: Adjusti
Setting Options Description Easy Interactive Function Auto Calibration The Auto Calibration and Manual Calibration options start calibration Manual Calibration Pen Mode Hovering Distance of Projectors Number of Pen Users Pen Operation Mode Enable Right Click Advanced Pen Mode: selects PC Free Annotation or PC Interactive Hovering: lets you turn off this feature Distance of Projectors: adjusts pen operation when using multiple projectors in the same room.
Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the screen Startup Screen A/V Mute Pen Toolbar Tab Pen Mode Icon Display Background: selects the screen color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts up A/V Mute: selects the screen color or logo to display when A/V Mute is turned on Pen Toolbar Tab: controls whet
Setting Options Description Projection Front Selects the way the projector faces the screen so the image is oriented correctly (rear settings cannot be used with the interactive pens) Front/Upside Down Rear Rear Upside Down Audio Input Setup Audio Input DisplayPort Audio Input HDMI Audio Input Operation Selects the audio input source for various image sources: Audio Input selects the audio source when the image source is Computer, Video, or USB-B (if not set to Auto); Audio1, Audio2, or Audio3 sele
Setting Options Description Standby Mode Energy Saving Selects the following when the projector is in standby mode (turned off): Networked Standby A/V Standby Energy Saving: saves power by turning off Standby Mode features Networked Standby: lets you monitor the projector over a network A/V Standby: lets you output audio to an external speaker, change the volume over the network, and output computer signals on an external monitor USB Type B Easy Interactive Function USB Display/Easy Interactive Fun
Setting Options Description Language Various languages available Selects the language for projector menu and message displays (not changed by Reset option) Parent topic: Adjusting the Menu Settings Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network.
Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Net.
Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours.
Information item Description Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code List Parent topic: Adjusting the Menu Settings Related references Projector Lamp Specifications Event ID Code List If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code.
Event ID code Cause and solution 0892 The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. 0893 The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. 0894 Communication with unauthorized access point was disconnected. Contact your network administrator. 0898 Failed to acquire DHCP. Make sure the DHCP server is operating correctly.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option.
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the projection window and obstacle sensor periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
• To remove dust or smudges, gently wipe the projection window with lens-cleaning paper. • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the projection window. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not used canned air, or the gases may leave a residue.
Parent topic: Projector Maintenance Cleaning the Projector Case Before cleaning the projector case, turn off the projector and unplug the power cord. • To remove dust or dirt, use a soft, dry, lint-free cloth. • To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid directly on the projector. Caution: Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the projector case. These can damage the case.
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Caution: Do not use canned air. The gases may leave a residue or push dust and debris into the projector's optics or other sensitive areas. 3. If dust is difficult to remove or the air filter is damaged, replace the air filter.
2. Slide the air filter cover switch and open the air filter cover.
3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations.
4. Place the new air filter in the projector as shown.
5. Close the air filter cover.
Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover. 4. Slide off the lamp cover.
5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
7. Gently insert the new lamp into the projector along the guide rail. If it does not fit easily, make sure it is facing the right way. Press the handle down. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 8. Tighten the screws to secure the lamp.
9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage.
3. Select the Reset menu and press Enter. 4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projector Lamp Maintenance Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual.
1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown.
4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Related references Remote Control Operation Replacing the Pen Batteries Each pen uses one AA alkaline or Sanyo Eneloop rechargeable battery. Replace the battery as soon as it runs out.
2. Remove the old battery. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the battery with the + and – ends facing as shown. 4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
1. Twist off the tip of the pen to remove it. 2. Twist on the new tip. Parent topic: Projector Maintenance Related references Optional Equipment and Replacement Parts Replacing the Control Pad Batteries If the control pad stops working after it has been used for a period of time, you may need to replace the batteries. The control pad uses two AA alkaline batteries. Caution: Use only the type of batteries specified in this manual.
1. Remove the top cover of the control pad by prying it off as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown.
4. Replace the cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Related references Optional Equipment and Replacement Parts Transporting the Projector The projector contains precision parts, some of which are glass.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Solving Interactive Problems Solving Network Problems Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on.
1 Power light 2 Lamp light 3 Temperature light Power light Lamp light Temperature light Status and solution Green Off Off Normal operation. Flashing green Off Off Warming up. Wait for an image to appear. Orange Off Off Standby or sleep mode. Flashing orange Off Off Preparing network monitoring or shutting down. (Wait for the light to remain orange before unplugging the projector.) Flashing red Flashing orange Projector is too hot.
Power light Lamp light Temperature light Status and solution Red Off Red Projector has overheated and turned off. Leave it turned off to cool down for five minutes. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Red Flashing red Off Lamp has a problem.
Power light Lamp light Temperature light Status and solution Varies Flashing orange Flashing orange An obstacle has been detected around the projection window. Remove the obstacle, or clean the obstacle sensors. If the problem persists, unplug the projector and contact Epson for help. Red Flashing red Flashing red Internal projector error. Turn the projector off, unplug it, and contact Epson for help.
5. When you are finished, do one of the following: • To select another problem to solve, press Esc. • To exit the help system, press Help. Parent topic: Solving Problems Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected images or sound.
• If the projector does not respond when you press buttons on the remote control, make sure the remote receivers are turned on. • For images projected with Windows Media Center, reduce the screen size from full screen mode. • For images projected from applications using Windows DirectX, turn off DirectX functions.
Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source Search button and wait a few seconds for an image to appear. • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary. • Check the connection from the projector to your video sources. • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
4. Select the Mirror Displays checkbox. Parent topic: Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears If the "Not Supported" message appears, try the following solutions: • Make sure the correct input signal is selected on the Signal menu. • Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer. (See your computer manual for details.
Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • If the projector is not mounted on the wall or ceiling, place it directly in front of the center of the screen, facing it squarely, if possible. • Use the Image Shift setting to adjust the image position, rather than moving the projector. • If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.
• If you are using the USB Display function, turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Supported Video Display Formats Related tasks Displaying From a PC Laptop Displaying From a Mac Laptop Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus.
Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment. • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation.
• If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable. • If you do not hear sound from an HDMI source, set the source to PCM output. • Make sure the Audio Input Setup option is set correctly in the Extended menu.
• If the projector's lamp shuts off and the power and Temp lights are red, the projector has overheated and shut off. Check the solutions for this light status. • If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receiver setting is turned on in the projector's menu, if available.
Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. Provide the request code and proof of ownership for assistance in unlocking the projector.
Parent topic: Solving Interactive Problems Related references Where to Get Help Solutions When the Interactive Pens Do Not Work If the pens do not work, try the following solutions: • The pens turn off automatically if you forget to turn them off. Slide the switch to turn the pen back on. • Make sure you are not covering the black section near the tip of the pen. • Make sure nothing is blocking the signal between the pen and the interactive pen receiver on the projector.
Related references Projector Setup Settings - Extended Menu Related tasks Using the Pens Replacing the Pen Batteries Calibrating Automatically Calibrating Manually Replacing the Pen Tips Solutions When the Interactive Pen Position Is Not Accurate If the pen position is not the same as the cursor, try the following solutions: • Make sure you have calibrated the system. Try manual calibration. • Make sure the cable cover is in place to keep cables from blocking the signal.
Solutions When the Interactive Pens Are Slow or Difficult to Use If the pens are difficult to use or respond too slowly, try the following solutions: • For easier operation, hold the pen perpendicular to the projection surface. • For the best performance, connect your computer to the projector using a VGA, HDMI, or DisplayPort cable for display and the USB cable for interactivity. • If you are using a computer, try setting your computer's display to 1280 × 800.
Solutions for Problems With Capturing, Printing, Saving, or Scanning If you are having trouble capturing and pasting, or printing, saving, or scanning, try the following solutions: • If you start a process using one of the pens, you must complete it using the pen. If you start using the remote control or control pad, you must complete the process using the remote control or control pad. • If you are having trouble pasting a captured image, make sure the image is not protected.
Parent topic: Solving Interactive Problems Related references Projector Setup Settings - Extended Menu Related tasks Enabling Windows Pen Input and Ink Features Using Windows Pen Input and Ink Features Solutions When the Pen Does Not Work Over a Network or the Toolbars Do Not Appear If you are having trouble using the pen with a network connection, or the toolbars do not appear on your projected image, try the following solutions: • If you are using EasyMP Network Projection software, select Options, then
Parent topic: Solving Problems Solutions When Wireless Authentication Fails If the wireless settings are correct, but authentication fails, you may need to update the Time/Schedule Settings on the Extended menu.
Where to Get Help If you need to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661.
Technical Specifications These sections list the technical specifications of your projector.
Projection methods Front, wall, or ceiling-mounted Optical aspect ratio 16:10 (width-to-height) Focus adjustment Manual Zoom adjustment Digital Zoom ratio 1:1.35 (Tele-to-Wide) Internal sound system 10 W monaural Noise level 35 dB (Normal Power Consumption mode) 28 dB (ECO Power Consumption mode) Keystone correction angle Vertical: ± 3º (manual); Horizontal: ± 3º (manual); USB-B port compatibility Meets USB 2.0 specification USB-A port compatibility 2 ports that meet USB 2.
Remote Control Specifications Reception range 19.7 feet (6 m) Batteries Two alkaline or manganese AA Parent topic: Technical Specifications Projector Dimension Specifications Height 6.1 inches (155 mm) (excluding feet) Width 14.4 inches (367 mm) Depth 14.8 inches (375 mm) Weight 12.3 lb (5.6 kg) Parent topic: Technical Specifications Control Pad Specifications Height 5.9 inches (149 mm) Maximum Height 6.0 inches (153.5 mm) (excluding rubber feet) Width 5.4 inches (136 mm) Depth 1.
Projector Electrical Specifications Rated frequency 50/60 Hz Power supply 100 to 240 VAC 3.2 to 1.5 A Power consumption Operating: (110 to 120 V) Normal Power Consumption mode: 322 W ECO Power Consumption mode: 231 W Standby: 0.20 W (Communication Off), 4.6 W (Communication On) Power consumption Operating: (220 to 240 V) Normal Power Consumption mode: 307 W ECO Power Consumption mode: 222 W Standby: 0.27 W (Communication Off), 5.
Projector Safety and Approvals Specifications United States FCC Part 15 Class B (DoC) UL60950-1 Canada ICES-003 Class B CSA C22.2 No. 60950-1 Parent topic: Technical Specifications Supported Video Display Formats For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Display format Refresh rate (in Hz) Resolution (in pixels) SXGA+ 60/75 1400 × 1050 WSXGA+* 60 1680 × 1050 UXGA 60 1600 × 1200 MAC13" 67 640 × 480 MAC16" 75 832 × 624 MAC19" 75 1024 × 768 59 1024 × 768 75 1152 × 870 TV (NTSC) 60 720 × 480 TV (SECAM) 50 720 × 576 TV (PAL) 50/60 720 × 576 SDTV (480i) 60 720 × 480 SDTV (576i) 50 720 × 576 SDTV (480p) 60 720 × 480 SDTV (576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 MAC21" Compos
Display format Refresh rate (in Hz) Resolution (in pixels) WXGA+ 60 1440 × 900 WXGA++ 60 1600 × 900 WSXGA+ 60 1680 × 1050 SXGA 60 1280 × 960 60 1280 × 1024 SXGA+ 60 1400 × 1050 UXGA 60 1600 × 1200 SDTV (480i***/480p) 60 720 × 480 SDTV (576i***/576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i)*** 50/60 1920 × 1080 HDTV (1080p) 24***/30***/50/60 1920 × 1080 * Only compatible when Wide is selected as the Resolution. ** DisplayPort input only.
Requirement Windows Mac Operating system Windows 2000 (Service Pack 4 only) Mac OS X 10.5.8, 10.6.x, 10.7.x, or 10.8.x Windows XP Professional, Home Edition, and Tablet PC Edition (32-bit); except for Service Pack 1 Windows Vista Ultimate, Enterprise, Business, Home Premium, and Home Basic (32-bit) Windows 7 Ultimate, Enterprise, Professional, and Home Premium (32and 64-bit); Home Basic and Starter (32bit) Windows 8, Windows 8 Enterprise and Pro (32- and 64-bit) USB version USB 1.1 and above (USB 2.
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement Wireless Telegraphy Act Regulations Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal.
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. • Do not place your hand or any object near the projection window. The high temperature of this area could cause burns, fire, or other damage. • Do not place the projector on an unstable cart, stand, or table.
setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and the air exhaust vent. • Do not operate the projector in a closed-in cabinet unless proper ventilation is provided. • Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector.
• Do not use the projector outside of the required temperature range of 41 to 95 ºF (5 to 35 ºC). Doing so may cause an unstable display and could lead to projector damage. Do not use or store the projector where it may be exposed to sudden changes in temperature. • Do not store the projector outside of the required temperature range of 14 to 140 ºF (–10 to 60 ºC) or in direct sunlight for long periods of time. Doing so may cause damage to the case.
Restriction of Use Parent topic: Notices Restriction of Use When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including failsafes and redundancies into your design to maintain safety and total system reliability.
not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. For Canadian Users This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, contact Epson as described in the User's Guide .
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail.
The list of LGPL Programs is as follows and the names of author are described in the source code of the LGPL Programs. LGPL Programs glibc-2.8 SDL-1.2.13 SDL-Image cairo-1.10.2 podofo-0.91 wcecompat-1.2 The GNU Lesser General Public License Version 2 is as follows. You also can see the GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in nonfree programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4.
during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13.
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
busybox-1.13.4 License terms of conditions of each program which are provided by owner of the copyright to the ÒBSD LicenseÓ are as follows. Copyright (c) The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Kenneth Almquist. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
This distribution contains the sixth public release of the Independent JPEG Group's free JPEG software. You are welcome to redistribute this software and to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. LEGAL ISSUES ============ In plain English: 1. We don't promise that this software works. (But if you find any bugs, please let us know!) 2. You can use this software for whatever you want. You don't have to pay us. 3. You may not pretend that you wrote this software.
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered by the above copyright and conditions, but instead by the usual distribution terms of the Free Software Foundation; principally, that you must include source code if you redistribute it. (See the file ansi2knr.c for full details.) However, since ansi2knr.
This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail. COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence. This code is released under the libpng license. libpng version 1.2.6, August 15, 2004, through 1.2.
Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc.
Glenn Randers-Pehrson glennrp@users.sourceforge.net March 29, 2012 zlib This projector product includes the open source software program "zlib" which applies the terms and conditions provided by owner of the copyright to the "zlib". The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of zlib programs zlib-1.1.4 zlib-1.2.
If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code. If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship.
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable
the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability.
License terms of conditions of each program which are provided by owner of the copyright to the "newlib" are as follows. The newlib subdirectory is a collection of software from several sources. Each file may have its own copyright/license that is embedded in the source file. Unless otherwise noted in the body of the source file(s), the following copyright notices will apply to the contents of the newlib subdirectory: (1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc. All rights reserved.
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (3) David M.
This software is the property of Advanced Micro Devices, Inc (AMD) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by AMD. AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS SOFTWARE.
To anyone who acknowledges that this file is provided "AS IS" without any express or implied warranty: permission to use, copy, modify, and distribute this file for any purpose is hereby granted without fee, provided that the above copyright notice and this notice appears in all copies, and that the name of Hewlett-Packard Company not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.
Copyright 2002 SuperH, Inc. All rights reserved This software is the property of SuperH, Inc (SuperH) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by SuperH. SUPERH MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS SOFTWARE.
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (14) Alexey Zelkin Copyright (c) 2000, 2001 Alexey Zelkin All rights reserved.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. (18) Citrus Project Copyright (c)1999 Citrus Project, All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
(26) Mike Barcroft Copyright (c) 2001 Mike Barcroft All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. iconv (Charset Conversion Library) v2.0 (28) Artem Bityuckiy (--enable-newlib-iconv) Copyright (c) 2003, Artem B. Bityuckiy, SoftMine Corporation. Rights transferred to Franklin Electronic Publishers.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3.
THIS SOFTWARE IS PROVIDED BY CODESOURCERY, INC. "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED.
Neither the name of MIPS Technologies Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM MIT License This projector product includes the open source software program which applies the terms and conditions provided by owner of the copyright to the "MIT License".
Copyright 2000 Keith Packard, member of The XFree86 Project, Inc. Copyright 2004, 2005, 2007, 2008, 2009, 2010 Red Hat, Inc. Copyright 2004 Nicholas Miell Copyright 2005 Lars Knoll & Zack Rusin, Trolltech Copyright 2005 Trolltech AS Copyright 2007 Luca Barbato Copyright 2008 Aaron Plattner, NVIDIA Corporation Copyright 2008 Rodrigo Kumpera Copyright 2008 Andre Tupinamb‡ Copyright 2008 Mozilla Corporation Copyright 2008 Frederic Plourde Copyright 2009, Oracle and/or its affiliates. All rights reserved.
jsp-1.4.3 License terms of conditions of each program which are provided by owner of the copyright to the " TOPPERS/JSP " are as follows. TOPPERS/JSP Kernel Toyohashi Open Platform for Embedded Real-Time Systems/Just Standard Profile Kernel Copyright (C) 2000-2003 by Embedded and Real-Time Systems Laboratory Toyohashi Univ. of Technology, JAPAN Copyright (C) 2004 by Embedded and Real-Time Systems Laboratory Graduate School of Information Science, Nagoya Univ., JAPAN.
Note: The TOPPERS License has been revised several times; what is shown above is the latest version that is to be applied to software made public hereafter. TINET This projector product includes the open source software program " TINET" which applies the terms and conditions provided by owner of the copyright to the " TINET ". The " TINET " are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of TINET programs tinet-1.4.
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (6) TINET and TOPPERS TINET (TCP/IP Protocol Stack) Copyright (C) 2001-2006 by Dep. of Computer Science and Engineering Tomakomai National College of Technology, JAPAN TINET (TCP/IP Protocol Stack) Copyright (C) 2001-2006 by Dep.
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.
