Installation Guide

6 Adjusting the Image

To ensure the best image quality, follow the steps below to adjust the projected image.

When using the BrightLink 575Wi/585Wi/575Wi+/585Wi+ and PowerLite 570/575W/580/585W, follow these

guidelines for setting up the projector:

• Make sure the image is evenly rectangular, without distortion.

• Make sure the projector is tilted no more than ±3° vertically and horizontally in relation to the projected

image.

A Turn on the projector

B Display the test pattern

1. Press the [Help] button.

2. Press the [ ] button on the remote control, or the [Wide] button on the control panel.

The test pattern is displayed.

Do not make adjustments with the Quick Corner or Keystone functions of the

projector. Doing so may result in a reduction in image quality.

Using the Remote Control Using the Control Panel