Operation Guide

Output audio from the Select to output the computer's audio from the projector. Clear to
projector output audio from the computer.
However, when playing movies with audio in Movie Sending Mode,
audio is always output from the projector regardless of this setting.
Note: Audio can only be transferred to one projector. Audio cannot
be transferred when connected to multiple projectors.
Restore Defaults Resets all adjustment values for Set options to their default
settings, except for Edit profile and Switch LAN in General
settings.
Parent topic: Set options
Toolbar
After EasyMP Network Projection starts and a connection is made with the projector, the toolbar is
displayed on the computer screen. You can use this toolbar to operate and make settings for the
projector, and to disconnect the network connection.
Displays the Select target projector screen.
Click to limit the projectors operated from the toolbar when projecting from multiple
projectors using the distribution function or multi-screen display function.
Select target
projector
The text below the icon indicates the projectors that can be controlled. ALL
indicates that all of the connected projectors can be controlled. For example, when
"1, 3" is displayed, projectors No. 1 and No. 3 can be controlled.
Stops projection while connected to the projector. A black screen is projected
while stopped.
Stop
94