Operation Guide

1 Browse Click to select the firmware file you downloaded or the projector
configuration file you created.
2 File Information Displays information about the selected firmware or configuration
file after clicking Show.
3 Show Select to show all of the projectors registered to the projector list
that support the selected firmware or configuration.
4 Clear all Click to clear all selected projectors.
5 Select all Click to select all of the projectors.
6 Set the Time Select to set the date and time for the update.
7 Start Now Click to start the update immediately. If this button is unavailable,
clear the Set the Time checkbox.
8 Register Click to register the update schedule when using the Set the Time
function.
Change Click to change the update schedule.
9 Cancel Click to close the Add Schedule/Change Schedule screen without
registering/changing a schedule.
Parent topic: Screen Summary
Related tasks
Updating the Firmware
Copying Projector Menu Settings Using Batch Setup
Changing an Update Schedule
Settings Screen
This screen is displayed when you click Settings from the Tool menu on the main screen.
41