Operation Guide
Note:
• If you try to close the application while updating the firmware, a message is displayed asking if you
want to cancel the update. If you select Yes, the update is canceled.
• If you try to close the application when there is a scheduled update standing by, a confirmation
message is displayed. If you choose to close the application, make sure you restart EasyMP Network
Updater before the scheduled update begins. If the application is closed when an update is scheduled
to begin, the update is canceled.
Parent topic: Updating Firmware and Copying Menu Settings
Copying Projector Menu Settings Using Batch Setup
You can copy the menu settings from one projector to one or more other projectors of the same model.
This allows you to quickly duplicate projector menu settings in a batch setup operation.
You can copy menu settings in a batch setup operation right away or schedule a time to copy them.
Note: You must add all the projectors that you will update to the projector list in the EasyMP Network
Updater software before using the batch setup feature.
When you copy the menu settings, make sure the projector is on or the projector's Standby Mode is set
to Communication On .
Not all menu settings are copied to another projector, such as following.
• Network menu settings (except for the Mail menu and the Others menu)
• Lamp Hours and Status from the Info menu
Note: Perform the batch setup operation before adjusting the image settings such as Keystone. Image
adjustment values are also applied to other projectors and adjustments you made before performing the
batch setup operation are overwritten.
When you copy the menu settings from one projector to another, the user's logo is also copied. Do not
register any information that you do not want to share between multiple projectors as a user's logo.
Caution: Do not unplug the projector's power cord while copying the menu settings. If the projector is
unexpectedly shut down while copying, the configuration may not be written correctly which could cause
the projector to malfunction. Epson takes no responsibility for batch setup failures and associated repair
costs due to power outages, communication errors, or other problems that may cause such failures.
19