BrightLink® 536Wi User's Guide
Contents BrightLink 536Wi User's Guide ................................................................................................................ 11 Introduction to Your Projector ................................................................................................................. Projector Features.............................................................................................................................. Product Box Contents...............................................
Connecting to a Composite Video Source ................................................................................ Connecting to an S-Video Video Source................................................................................... Connecting to a Video Source for Sound .................................................................................. Connecting to an External Computer Monitor................................................................................
Setting Up Crestron RoomView Support ....................................................................................... 67 Controlling a Networked Projector Using Crestron RoomView ...................................................... 68 Using Basic Projector Features ............................................................................................................... Turning On the Projector ....................................................................................................
Starting a PC Free Movie Presentation ......................................................................................... 96 Adjusting Projector Features ................................................................................................................... 98 Shutting Off the Picture and Sound Temporarily ................................................................................ 98 Stopping Video Action Temporarily ....................................................................
Using PC Free Annotation ........................................................................................................... 131 Built-in Tools for Use Without a Computer................................................................................... 132 Using the Built-in Whiteboard Mode ............................................................................................ 134 Changing Pen Width and Color Using the Built-in Toolbar ..........................................................
Solving Image or Sound Problems ................................................................................................... 182 Solutions When No Image Appears............................................................................................. 182 Solutions When Image is Incorrect Using the USB Display Function .......................................... 183 Solutions When "No Signal" Message Appears...........................................................................
Projector Lamp Specifications.......................................................................................................... Remote Control Specifications ......................................................................................................... Projector Dimension Specifications.................................................................................................. Projector Electrical Specifications .......................................................................
BrightLink 536Wi User's Guide Welcome to the BrightLink 536Wi User's Guide.
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual.
• Optional wireless network support, including video and audio transfer • PC Free photo slide shows via connected USB memory devices or Epson document camera • Dual VGA ports for connections by multiple presenters • Port for connecting an external monitor or second projector • Port for connecting a microphone Innovative display and operation features • Low total cost of ownership with long-life projector lamp and high-efficiency air filter • High zoom ratio for larger images in shorter projection distances
Make sure your projector box included all of these parts: 1 Projector 2 Lens cover 3 Remote control 4 Remote control batteries (two AA alkaline) 5 Power cord 6 VGA computer cable 7 Password Protected sticker 8 Projector documentation CD-ROM 9 Projector software CD-ROM 14
10 Interactive pen and battery (one AA alkaline) Parent topic: Projector Features Related concepts Projector Connections Additional Components Depending on how you plan to use the projector, you may need to obtain the following additional components: • To receive a composite video signal, you need an RCA-style video or A/V cable. See your local computer or electronics dealer for purchase information. • To receive an S-Video signal, you need an S-Video cable compatible with your device.
Option or part Part number Genuine Epson replacement lamp (ELPLP87) V13H010L87 Air filter replacement (ELPAF47) V13H134A47 Wireless LAN module (ELPAP07) V12H418P12 Quick Wireless Connection USB key (ELPAP09) V12H005M09 Additional interactive pen A (ELPN04A) (orange) V12H666010 Additional interactive pen B (ELPN04B) (blue) V12H667010 Interactive pen extension V12H590001 Replacement interactive pen tips V12H668010 Mimio Studio Interactive software V12HMSS020 Promethean ActivInspire softwar
Option or part Part number 96-inch whiteboard V12H468001 Accolade Duet portable projector screen ELPSC80 Component-to-VGA video cable (ELPKC19) V12H005C19 1-Year Extended Depot Repair Service Plan EPPFTPA1 1-Year Extended Exchange Service Plan EPPEXPA1 2-Year Extended Depot Repair Service Plan EPPFTPA2 2-Year Extended Exchange Service Plan EPPEXPA2 Parent topic: Projector Features Warranty and Registration Information Your projector comes with a basic warranty that lets you project with con
Where to Go for Additional Information Need quick help on using your projector? Here's where to look for help: • Built-in help system Press the Help button on the remote control or projector to get quick solutions to common problems. • epson.com/support (U.S) or epson.ca/support (Canada) View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24 hours a day.
Projector Parts - Front/Top 1 Remote control receiver 2 Interactive pen receiver 3 Foot release lever 4 Front adjustable foot 5 Projector lens 6 Air intake vent (air filter) 7 Horizontal keystone slider 8 Focus ring 19
9 Control panel 10 Lamp cover 11 Exhaust vent 12 A/V Mute button and Auto Calibration button (hold down for 3 seconds to auto calibrate) 13 Lens cover Parent topic: Projector Part Locations Projector Parts - Rear 1 Power inlet 2 S-Video port 3 RS-232C port 4 Video port 5 L-Audio-R ports 6 Mic (microphone) port 7 Monitor Out port 20
8 Audio1 port 9 Audio Out port 10 Audio2 port 11 SYNC In/Out ports 12 Speaker 13 HDMI port 14 Computer2 port 15 Computer1 port 16 Remote receiver 17 Network (LAN) port 18 USB-B port 19 USB-A port 20 Wireless LAN unit cover screw Parent topic: Projector Part Locations 21
Projector Parts - Base 1 Ceiling mount holes (3) 2 Wall mount holes (5) 3 Security cable attachment point 4 Rear feet 5 Front adjustable foot 22
Parent topic: Projector Part Locations Projector Parts - Control Panel 1 Status lights 2 Source Search button (searches for connected video sources) 3 Enter button (selects options) 4 Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons 5 Help button (accesses projector help information) 6 Esc button (cancels/exits functions) 7 Wide/Tele buttons (adjust projected image size), horizontal keystone adjustment buttons (adjust screen shape), and arrow buttons 8 Menu butto
Projector Parts - Interactive Pen 1 Pen tip 2 Battery light 3 Power/function button 4 Attachment for optional strap or cord 5 Battery cover Parent topic: Projector Part Locations 24
Projector Parts - Remote Control 1 Power button 25
2 Computer button (cycles through connected computer sources) 3 Video button (cycles through connected video sources) 4 Numeric buttons (enter numbers) 5 Auto button (automatically adjusts position, tracking, and sync settings) 6 Aspect button (selects the image aspect ratio) 7 Num button (when held down, switches numeric buttons to number function) 8 Menu button (accesses projector menu system) 9 Arrow buttons (move through on-screen options and control wireless mouse functions) 10 Enter b
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Installing Batteries in the Pen Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling or wall mount if you want to use it in a fixed location.
Rear Front ceiling Rear ceiling 28
Wall-mounted Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an angle. If you project from the ceiling or wall, or from the rear, be sure to select the correct Projection option in the projector's menu system. Note: Interactivity is not available when using rear or rear ceiling projection.
also use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support (Canada). 16:10 Aspect Ratio Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 55 inches 22 to 30 inches (56 to 77 cm) 3.4 inches (9 cm) 60 inches 24 to 33 inches (61 to 84 cm) 3.7 inches (9 cm) 70 inches 28 to 39 inches (72 to 99 cm) 4.4 inches (11 cm) 80 inches 33 to 45 inches (83 to 113 cm) 5 inches (13 cm) 90 inches 37 inches (94 cm)* 5.
4:3 Aspect Ratio Screen or image size Projection distance (1) Offset from lens center (2) 50 inches 23 to 31 inches (58 to 79 cm) 3.5 inches (9 cm) 60 inches 28 to 38 inches (70 to 96 cm) 4.2 inches (11 cm) 70 inches 32 to 44 inches (82 to 112 cm) 4.9 inches (13 cm) 80 inches 37 inches (94 cm)* 5.6 inches (14 cm) 90 inches 42 inches (107 cm)* 6.3 inches (16 cm) 102 inches 48 inches (121 cm)* 7.
• For video projection, connect devices such as DVD players, gaming consoles, digital cameras, and smartphones with compatible video output ports. • If your presentation or video includes sound, you can connect audio input cables, if necessary. • For slide shows without a computer, you can connect USB devices (such as a flash drive or camera) or an optional Epson document camera.
Connecting to a Computer for USB Video and Audio If your computer meets the system requirements, you can send video and audio output to the projector through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a USB cable. Note: This also lets you use the interactive pen with your computer. You need to change the USB Type B setting in the projector's Extended menu before you can project through the USB port.
The projector displays the image from your computer's desktop and outputs sound, if your presentation contains audio. Parent topic: Connecting to Computer Sources Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable. Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port.
2. Connect the other end to the projector's HDMI port. Parent topic: Connecting to Computer Sources Connecting to a Computer for Pen Use or USB Mouse Control If you connected your computer to a Computer or HDMI port on the projector, you also need to connect the USB cable so you can use the pens with your computer. Connecting the USB cable also lets you set up the remote control to act as a wireless mouse, but you cannot use this feature at the same time you are using the pens with your computer. 1.
Related tasks Using the Remote Control as a Wireless Mouse Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it to the projector's USB-B or HDMI port, you can still play sound through the projector's speaker system. Just connect an optional 3.5 mm stereo mini-jack audio cable as described here. 1. Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or audio-out port. 2.
2. Connect the other end to the projector's HDMI port. Parent topic: Connecting to Video Sources Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1.
Related references Input Signal Settings - Signal Menu Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1. Connect the cable with the yellow connector to your video source's yellow video output port. 2. Connect the other end to the projector's Video port.
Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. If you are projecting video using a Computer port, connect the projector to the video source using an optional stereo mini-jack audio cable. If you are projecting video using the Video or S-Video port, connect the projector to the video source using an RCA audio cable.
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly. 1. Make sure your computer is connected to the projector's Computer port. If there are two computer ports, make sure you use the Computer1 port. 2. Connect the external monitor's cable to your projector's Monitor Out port. Note: Only analog RGB signals from the Computer 1 port can be output to an external monitor.
4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port. Parent topic: Projector Connections Related references Projector Setup Settings - Extended Menu Connecting a Microphone You can connect a microphone to the projector's Mic port to provide audio support during presentations. Note: The projector supports powered or dynamic microphones only.
Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector.
Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projector's USB-A port and use it to project images and other content. 1. If your USB device came with a power adapter, plug the device into an electrical outlet. 2. Connect the USB cable (or USB flash drive or USB memory card reader) to the projector's USB-A port. Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly. 3.
Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector. 1. If the device has a power button, turn off and unplug the device. 2. Disconnect the USB device or camera from the projector. Parent topic: Connecting to External USB Devices Connecting to a Document Camera You can connect an Epson document camera to your projector to project images viewed by the camera.
1. Connect one end of the remote control cable to the SYNC In port on one projector, and connect the other end to the SYNC Out port on the other projector. Note: If you are connecting three or more projectors, connect the projectors in a chain as shown. 2. In the Extended menu, set the Sync of Projectors setting to Wired.
1. Remove the battery cover. 2. Insert the batteries with the + and – ends facing as shown.
3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Setting Up the Projector Installing Batteries in the Pen The pen uses one AA battery. 1. Remove the battery cover as shown.
2. Insert the battery with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place.
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Projection Wireless Network Projection Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Controlling a Networked Projector Using a Web Browser Crestron RoomView Support Wired Network Projection You can send images to your projector through a wired network.
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the EasyMP Network Projection software.
3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control. • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. (Default user name is EPSONWEB; default password is admin.) • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.
10. To prevent display of the IP address on the standby screen, turn off IP Address Display. 11. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wired Network Projection Wireless Network Projection You can send images to your projector through a wireless network. To do this, you must install the Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection.
Installing the Wireless LAN Module Using Quick Wireless Connection (Windows Only) Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Selecting Wireless Network Settings in OS X Setting Up Wireless Network Security Parent topic: Using the Projector on a Network Related references Optional Equipment and Replacement Parts Projector Network Settings - Network Menu Installing the Wireless LAN Module To use the projector over a wireless network, install the optional Epson
3. Insert the wireless LAN module into the port. 4. Attach the wireless LAN module stopper and secure it using the screw you removed. 5. Plug in and turn on the projector.
Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB Key to quickly connect the projector to a Windows computer wirelessly. Then you can project your presentation and remove the key when you are done. Note: The Quick Wireless Connection USB Key is not included with your projector. 1. Turn on the projector. 2. Connect the USB key to the projector's USB-A port. You see a projected message that the network information update is complete. 3. Remove the USB key. 4.
3. Select the Network menu and press Enter. 4. Set the Wireless Mode setting to Wireless LAN On and press Enter. 5. Select Network Configuration and press Enter. 6. Select the Basic menu and press Enter.
7. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control. • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. (Default user name is EPSONWEB; default password is admin.
Wireless LAN Menu Settings Parent topic: Wireless Network Projection Wireless LAN Menu Settings Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick: lets you quickly connect to one computer or use the optional Quick Wireless Connection USB key to connect Advanced: lets you connect to multiple computers via a wireless network access point Channel 1ch In Quick connection mode, selects the frequency band (channel) used by the wireless LAN 6ch 11ch
Setting Options Description SSID Display On Selects whether to display the SSID on the network standby screen Off IP Address Display On Selects whether to display the IP address on the network standby screen Off Parent topic: Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1.
Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network. Set up one of the following security options to match the settings used on your network: • WPA/WPA2-PSK security (Advanced connection mode) • WPA2-PSK security (Advanced and Quick connection mode) Note: To use wireless network security in Quick connection mode, you must enable SSID Auto Setting. Check with your network administrator for guidance on entering the correct information. 1.
Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the network you are connecting the projector to.
5. Turn on Mail Notification. 6. Enter the IP address for the SMTP Server option. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25). 8. Choose an Address field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses. Note: Your e-mail address can be up to 32 alphanumeric characters long. 9.
Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Others menu and press Enter. 5.
10. If you want this projector to receive broadcasted messages over the network, turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using the Message Broadcasting plug-in for EasyMP Monitor (Windows only). 11. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
You see a screen like this: 1 Power button control 2 Selects Computer port source 3 Selects Video, S-Video, and HDMI port sources 4 Freeze button control 5 A/V Mute button control 6 Page Up and Page Down button controls 7 Searches for sources 8 Selects the network source 9 Selects the USB Display or USB device source 10 Volume button controls 11 Closed Caption control 6. Select the icon corresponding to the projector function you want to control.
Related references Projector Setup Settings - Extended Menu Crestron RoomView Support If you are using the Crestron RoomView network monitoring and control system, you can set up your projector for use on the system. Crestron RoomView lets you control and monitor your projector using a web browser. Note: You cannot use the Epson Web Control feature or the Message Broadcasting plug-in for EasyMP Monitor when you use Crestron RoomView. For additional information on Crestron RoomView, contact Crestron.
4. Select the Others menu and press Enter. 5. Set the setting to On to allow the projector to be detected. 6. Turn off the projector, then turn it on again to enable the setting. Parent topic: Crestron RoomView Support Related references Projector Setup Settings - Extended Menu Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1.
You see this screen: 3. Select the input source that you want to control in the Sources List box. You can scroll through available sources using the up and down arrows in the box. 4. To control projection remotely, click the on-screen buttons that correspond to the projector's remote control buttons. You can scroll through button options at the bottom of the screen.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features.
2. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. The projector's power light turns blue. This indicates that the projector is receiving power. 3. Press the power button on the projector or the remote control to turn on the projector. The projector beeps and the Status light flashes blue as the projector warms up. Once the projector is warmed up, the Status light stops flashing and turns blue.
The projector displays a shutdown confirmation screen. 2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary). 3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.
Related references Projector Setup Settings - Extended Menu Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus.
2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape.
Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality. When you turn on automatic keystone correction in your projector's Settings menu, your projector automatically corrects vertical keystone effects when you reposition the projector.
After correction, your image is slightly smaller. Parent topic: Image Shape Correcting Image Shape with the Keystone Buttons You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides. Note: For interactive use, make sure the degree of horizontal and vertical keystone correction is no more than ± 3°. 1. Turn on the projector and display an image.
3. Press a keystone button on the projector's control panel to adjust the image shape. Note: The horizontal keystone adjustment buttons are labeled Wide and Tele. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the Keystone settings in the projector menus.
Related references Projector Feature Settings - Settings Menu Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
You see the Quick Corner adjustment screen: 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc. Note: Using Quick Corner can affect the accuracy of the interactive pens. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Resizing the Image with the Wide and Tele Buttons 1.
3. To reduce the image size, press the Tele button. Note: If the projector is installed out of reach, you can also adjust the image size with the remote control using the Zoom setting in the projector menus. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Focusing the Image Using the Focus Ring 1. Turn on the projector and display an image. 2. To sharpen the image focus, rotate the projector’s focus ring.
Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here. 1 19.7 feet (6 m) 2 ± 30° 3 60° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands.
Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can control projection at a distance from the computer. 1. Connect the projector to a computer using the projector's USB-B, Computer, or HDMI port to display video. 2. If you connected your computer to a port other than the projector's USB-B port, also connect a USB cable to the projector's USB-B port and to a USB port on your computer (for wireless mouse support). 3. Start your presentation.
Using the Remote Control as a Pointer You can use the projector's remote control as a pointer to help you call out important information on the screen. The default pointer shape is an arrow, but you can select an alternative shape using the Settings menu. 1. Press the Pointer button on the remote control. 2. Use the arrow buttons on the remote control to move the pointer on the screen. 3. Press Esc to clear the pointer from the screen.
3. Do one of the following: • Press the Source Search button on the projector or remote control until you see the image from the source you want. • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.
Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen. • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount. • Rear flips the image horizontally to project from behind a translucent screen.
Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features Related references Image Quality Settings - Image Menu Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. The shape and size of the displayed image changes, and the name of the aspect ratio appears briefly on the screen. 3.
Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal and the Resolution setting. Normal Displays images using the full projection area and maintains the aspect ratio of the image. 16:9 Converts the aspect ratio of the image to 16:9. Full Displays images using the full width of the projection area, but does not maintain the aspect ratio. Zoom Displays images using the full width of the projection area and maintains the aspect ratio of the image.
Related references Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from a DVD player or other video source, insert a disc or other video media and press the play button, if necessary. 3. Press the Color Mode button on the remote control to change the Color Mode.
Color Mode Description Blackboard Best for presentations onto a green chalkboard (adjusts the colors accordingly) Parent topic: Color Mode Related references Image Quality Settings - Image Menu Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Menu button. 3. Select the Image menu and press Enter.
• Normal for standard brightness adjustment. Note: You can set Auto Iris for each Color Mode that supports the feature. You cannot change the Auto Iris setting when you are using a Closed Caption setting. 5. Press Menu or Esc to exit the menus. Parent topic: Color Mode Controlling the Volume with the Volume Buttons You can use the Volume buttons on the remote control to adjust the volume as you project a presentation with audio.
Starting a Slide Show Starting a PC Free Movie Presentation Parent topic: Using Basic Projector Features Related concepts USB Device Projection Related tasks Connecting a USB Device or Camera to the Projector Slideshow Features Your projector's Slideshow feature lets you do the following: • Display individual images • Present a slide show of all images in a folder Parent topic: Projecting a PC Free Presentation Supported PC Free File Types You can project these types of files using the projector's PC Free
File contents File type (extension) Details Image .jpg Make sure the file is not: • CMYK format • Progressive format • Highly compressed • Above 8192 × 8192 resolution .bmp Make sure the file resolution is not above 1280 × 800 .gif Make sure the file is not: • Above 1280 × 800 resolution • Animated Movie .png Make sure the file resolution is not above 1280 × 800 .
The Slideshow screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter. • To view additional images in a folder, highlight Next page or Previous page, or press the Page up or down buttons on the remote control, and press Enter. 3.
PC Free Display Options Parent topic: Projecting a PC Free Presentation PC Free Display Options You can select these display options when using the projector's PC Free feature.
Setting Options Description Effect Wipe Transitions between images with a wipe effect Dissolve Transitions between images with a dissolve effect Random Transitions between images using a random variety of effects Parent topic: Starting a Slide Show Starting a PC Free Movie Presentation After connecting a USB device or digital camera to the projector, you can switch to the USB input source and start your movie.
2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter. • To view additional files in a folder, highlight Next page or Previous page and press Enter, or press the Page up or down buttons on the remote control. 3.
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Creating a User Pattern to Display Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation.
Note: You can also stop video action using the interactive pens. 1. Press the Freeze button on the remote control to stop the video action. 2. To restart the video action in progress, press Freeze again. Parent topic: Adjusting Projector Features Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen. Note: You can also zoom into your image using the interactive pen. 1.
• To pan around the zoomed image area, use the arrow buttons. • To zoom out of the image, press the E-Zoom – button as necessary. • To return to the original image size, press Esc. Parent topic: Adjusting Projector Features Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: • Password security to prevent the projector from being turned on, and prevent changes to the startup screen and other settings.
Setting a Password To use password security, you must set a password. 1. Hold down the Freeze button on the remote control for about ten seconds or until you see this menu. 2. Press the down arrow to select Password and press Enter. You see the prompt "Change the password?". 3. Select Yes and press Enter. 4. Press and hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt.
6. Press Esc to return to the menu. 7. Make a note of the password and keep it in a safe place in case you forget it. Parent topic: Password Security Types Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want to use. If you do not see this menu, hold down the Freeze button on the remote control for about 10 seconds or until the menu appears. 1.
Entering a Password to Use the Projector If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a password whenever you turn on the projector. You must enter the correct password to use the projector. 1. Press and hold down the Num button on the remote control while you enter the password using the numeric buttons. The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again.
• If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the password again. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.
You see a selection box overlaying your image. 5. Use the arrow buttons on the remote control to surround the image area you want to use as the User's Logo and press Enter. You see a prompt asking if you want to select this image area. 6. Select Yes and press Enter. (If you want to change the selected area, select No, press Enter, and repeat the last step.) You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter.
Related references Projector Setup Settings - Extended Menu Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You can lock all the buttons or all the buttons except the power button. 1. Press the Menu button. 2. Select the Settings menu and press Enter. 3. Select the Control Panel Lock setting and press Enter. 4. Select one of these lock types and press Enter: • To lock all of the projector's buttons, select Full Lock.
Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for seven seconds to unlock them. Parent topic: Locking the Projector's Buttons Installing a Security Cable You can install two types of security cables on the projector to deter theft. • Use the security slot on the projector to attach a Kensington Microsaver Security system, available from Epson.
2. Press the Menu button, select the Settings menu, and press Enter. 3. Select the Pattern setting and press Enter. 4. Select the User Pattern setting and press Enter. You see a prompt asking if you want to use the displayed image as a User Pattern. 5. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished. You see a completion message. 6.
Using the Interactive Features Follow the instructions in these sections to use your projector's interactive features. Interactive Modes Using the Interactive Pens Using BrightLink With a Computer Using BrightLink Without a Computer Interactive Modes The BrightLink interactive features turn any wall into an interactive whiteboard, either with or without a computer. These interactive modes are available: • In whiteboard mode, you can use one or both interactive pens to write on the projected "whiteboard".
1. Make sure the Pen Mode option in the Easy Interactive Function menu is set to PC Free Interactive. 2. Hover near or tap the board or projected image with the interactive pen. Tap the left or right arrow icon, 3. Tap the whiteboard icon in the toolbar. You see the whiteboard screen, with the main toolbar on the side and the projection control toolbar on the bottom of the screen: 4. To move the main toolbar to the other side of the screen, tap the the screen.
6. To show or hide the projection control toolbar, select the arrow. Note: You can also show or hide the projection control toolbar from the projector's Display menu. Parent topic: Interactive Modes Drawing on a Projected Image (PC Free Annotation Mode) You can project from a computer, tablet, video device, or other source and add notes to your projected content using the interactive pens. You can use either one pen or both pens at the same time.
You see the main toolbar on the side and the projection control toolbar on the bottom of the projected image. 5. To move the main toolbar to the other side of the screen, tap the the screen. arrow on the opposite side of Note: You can use the pen to move the arrow icon up or down to reposition the toolbar. 6. To switch to one of the other interactive modes, do one of the following: • To switch to whiteboard mode, select the Whiteboard tool. • To switch to PC Interactive mode, select , then select .
7. To close the main toolbar, select the icon at the bottom of the toolbar. Note: If you want to hide the toolbar automatically after drawing, select the the toolbar (the icon will change shape). 8. To show or hide the projection control toolbar, select the icon at the bottom of arrow.
4. Select the USB Type B setting and press the Enter button. 5. Select one of the following: • Easy Interactive Function to use PC Interactive mode. • USB Display/Easy Interactive Function to use PC Interactive mode and USB Display. • Wireless Mouse/USB Display to use the mouse and USB Display 6. Press the Esc button to exit the USB Type B menu. 7. Select the Easy Interactive Function setting and press the Enter button.
8. Select one of the following as the Pen Operation Mode: • Two Users/Mouse: Lets you use both interactive pens as a mouse with programs that support two pens • One User/Mouse: Lets you use one interactive pen as a mouse • One User/Pen: Uses the Windows pen and ink feature (Windows 8.x, Windows 7, and Windows Vista) 9. Press the Enter button on the remote control and press the Menu button to exit the Extended menu. 10. Hover near or tap on the board or the projected image with the interactive pen. The 11.
Note: The Easy Interactive Driver must be installed and running to use Easy Interactive Tools on a Mac. Requirement Windows Mac Operating system Windows XP Professional, Home Edition, and Tablet PC Edition (32-bit); except for Service Pack 1 OS X 10.5.8, 10.6.x, 10.7.x, 10.8.x, 10.9.x, 10.10.x Windows Vista Ultimate, Enterprise, Business, Home Premium, and Home Basic (32-bit) Windows 8.
Note: The pen turns off automatically after 20 minutes of inactivity. Tap the pen tip or press the button on the side to turn the pen back on. 1 Pen tip 2 Battery light 3 Power/function button 4 Attachment for optional strap or cord 5 Battery cover • To turn on the pen, tap the pen tip or press the power/function button. Note: If you press the button, the battery light flashes briefly, then turns off. If the battery is low, the battery light flashes continuously.
• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the black section near the tip of the pen. • To write or draw on the projection surface in annotation mode or whiteboard mode, do the following: • To select a projected item, such as an icon, tap the projection surface with the pen tip. • To draw on the projected screen, tap the projection surface with the pen and drag it as necessary. • To move the pointer, hover over the surface without touching it.
• To use the pen as a mouse in PC Interactive mode, select the icon and do the following: • To left-click, tap the board with the pen tip. • To double-click, tap twice. • To right-click, press the board with the pen for about 3 seconds. • To click and drag, tap and drag with the pen. • To move the cursor, hover over the board without touching it. Note: If you do not want to use the hovering feature, you can turn it off using the Easy Interactive Function setting in the projector's Extended menu.
Calibrating Automatically Calibrating Manually Parent topic: Using the Interactive Pens Calibrating Automatically You do not need the pens or a computer for Auto Calibration. Note: You can start Auto Calibration by pressing the User button on the remote control, by pressing and holding the A/V Mute button on the projector for three seconds, or by pressing the Menu button on the remote control as described here. 1. Press the Menu button, select the Extended menu, and press Enter.
2. Select the Easy Interactive Function setting and press Enter. 3. Select Auto Calibration and press Enter. 4. Adjust the image focus, if necessary. 5. Press Enter to select Yes. A pattern appears then disappears, and the system is calibrated. If you see a message that calibration failed, check for obstacles, disable the Quick Corner and Keystone settings, and retry the Auto Calibration. If you still see a message that calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate manually. Parent topic: Pen Calibration Calibrating Manually If the cursor location and pen position do not match after auto calibration, you can calibrate manually. 1. Press the Menu button, select the Extended menu, and press Enter. 2. Select the Easy Interactive Function setting and press Enter.
3. Select Manual Calibration and press Enter. 4. Adjust the image focus, if necessary. 5. Press Enter to select Yes. A green circle appears in the upper left corner of your projected image. 6. Touch the center of the circle with the tip of the pen. The circle disappears, and you see another circle below the first one.
Note: For the most accurate calibration, make sure you touch the center of the circle. 7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next circle appears at the top of a new column. Note: Make sure you are not blocking the signal between the pen and the interactive receiver (next to the projection window on the projector). If you make a mistake, press the Esc button on the remote control to go back to the previous circle.
Using BrightLink With a Computer You can connect a computer to the projector and install the software from the CD labeled "Epson Projector Software for Easy Interactive Function" or you can install third party interactive software. You can then do the following: • Use the pens as a mouse to control your computer • Use the Easy Interactive Tools software to annotate with two pens at the same time Note: See the online Easy Interactive Tools Operation Guide for detailed information.
2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the Easy Interactive Function setting and press Enter. 4. Set the Pen Mode setting to PC Interactive. Note: You can also change this setting by pressing the Pen Mode button on the remote control.
5. Select Advanced in the PC Interactive section and press Enter. Note: Make sure the Auto Adjust Pen Area option is set to Off to prevent changes to your manual pen area adjustments. 6. Select Manual Adj. Pen Area and press Enter. You see this screen: 7. Press Enter to select Yes. The mouse pointer moves toward the top left corner. 8. When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the interactive pen.
9. When the mouse pointer stops at the bottom right corner of the image, touch the tip of the pointer with the interactive pen. Parent topic: Using BrightLink With a Computer Easy Interactive Tools Your projector came with a CD containing the Easy Interactive Tools software for use with a computer. Easy Interactive Tools lets you use your interactive pen as a mouse to navigate, select, scroll, draw, save, and interact with projected content from your computer.
1. Press the Menu button, select the Extended menu, and press Enter. 2. Select the Easy Interactive Function setting and press Enter. 3. Set the Pen Operation Mode setting in the PC Interactive section to One User/Pen and press Enter.
Using Windows Pen Input and Ink Tools If you are using Windows 8.x, Windows 7, or Windows Vista, you can add handwritten input to your work and convert it to text. If you have Microsoft Office 2003 or later, you can also use the Ink function to add handwritten notes to a Word document, Excel spreadsheet, or PowerPoint presentation. Note: Option names for the annotation functions may vary depending on your version of Microsoft Office. • To open the Touch Keyboard in Windows 8.
• To annotate your PowerPoint slides in Slideshow mode, press the button on the side of the interactive pen or press the projection surface with your finger for about 3 seconds, and select Pointer Options > Pen from the pop-up menu. Note: This also works in Windows XP Tablet PC Edition. For more information about these features, see Windows Help.
3. To activate the toolbar, tap the projection surface with the pen. You see arrow icons on the left and right side of the projected image. Note: The toolbar arrows disappear if they are not used. To make them reappear, tap the projection surface with the pen. 4. To display the toolbar, select one of the arrows. Note: You can use the pen to move the arrows up or down. 5. To close the toolbar, select the icon at the bottom of the toolbar.
In the following illustration, the annotation mode tools are shown on the left, and the whiteboard mode tools on the right: Switch to annotation mode Switch to whiteboard mode Undo the last annotation Redo the last undo Select a white or black background or one of 4 patterns (whiteboard mode only) Change custom pen color and width Write or draw free-form lines with custom pen 133
Change highlighter pen color Write or draw free-form lines with transparent highlighter pen Black pen (fine point on left, thick on right) Red pen (fine point on left, thick on right) Blue pen (fine point on left, thick on right) Eraser (thin width on left, thick on right) Clear all annotations Hide the toolbar after each annotation Close the toolbar Parent topic: Using BrightLink Without a Computer Using the Built-in Whiteboard Mode In whiteboard mode, you can project a solid or patterned background, and
3. Do one of the following to write or draw on the background. • To erase, select the Eraser tool. • To clear the whole screen, select the Clear all tool. Parent topic: Using BrightLink Without a Computer Changing Pen Width and Color Using the Built-in Toolbar When you use the custom Pen or highlighter tools, you can select different colors and line widths.
Turn off the projector Change the image source using a displayed list. (To close the image source list, select the arrow icon at the bottom of the list.
Selecting Network Device Display from the Projector Control Toolbar If you have connected devices to the projector via a network, you can select to project an image from up to 50 of those devices using the projector control toolbar. You can select the image source from computers that are running EasyMP Multi PC Projection, and smartphones or tablets that are running Epson iProjection. 1. Select the icon on the projector control toolbar. An image source list appears. 2. Select the Participant List option.
3. Select the user name for the device from which you want to project. The icon next to a user name indicates the currently selected source. Note: Select Refresh to update the user list. 4. Select Return. You see the selected user's screen image.
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings.
1. Press the Menu button on the control panel or remote control. You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4. Press the up or down arrow button to move through the settings. 5. Change the settings using the buttons listed on the bottom of the menu screens. 6. To return all the menu settings to their default values, select Reset. 7.
Setting Options Description Color Mode See the list of available Color Modes Adjusts the vividness of image colors for various image types and environments Brightness Varying levels available Lightens or darkens the overall image Contrast Varying levels available Adjusts the difference between light and dark areas of the image Color Saturation Varying levels available Adjusts the intensity of the image colors Tint Varying levels available Adjusts the balance of green to magenta tones in the
Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control. To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description Sync.
Setting Options Description Input Signal Auto Specifies the signal type from input sources connected to computer ports RGB Component Auto: detects signals automatically RGB: corrects color for computer/RGB video inputs Component: corrects color for component video inputs Video Signal Auto Various video standards Specifies the signal type from the input sources connected to the video ports Auto: detects signals automatically Aspect See the list of available aspect ratios Sets the aspect ratio (w
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features.
Setting Options Description Control Panel Lock Full Lock Controls projector button locking to secure the projector Partial Lock Full Lock: locks all buttons Off Partial Lock: locks all buttons except the power button Off: no buttons locked Pointer Shape Three shapes available Changes the shape of the remote control pointer feature Volume Varying levels available Adjusts the volume of projector’s speaker system or external speakers Mic Input Level Varying levels available Adjusts the volume
Setting Options Description Pattern Pattern Display Selects various pattern display options Pattern Type User Pattern Test Pattern Pattern Display: lets you display the selected pattern type on the screen to aid in presentation Pattern Type: selects the type of grid or line pattern to display User Pattern: captures a projected screen and saves it as a pattern for display Test Pattern: displays a test pattern to assist in focusing and zooming the image and correcting image shape Parent topic: Adjusti
Easy Interactive Function Settings Setting Options Description — Auto Calibration and Manual Calibration: start calibration for pen operations PC Free Annotation Selects the mode for the interactive pens General Auto Calibration Manual Calibration Pen Mode PC Interactive Hovering On Turns the pen hovering feature on and off; when set to On, the pointer follows the pen tip as you hover it over the screen and move it around Off Advanced Distance of Projectors Sync of Projectors Wired Sync Mode Co
Setting Options Description Pen Operation Mode Two Users/Mouse Selects the operating system version for pen operations One User/Mouse One User/Pen One User/Mouse and Two Users/Mouse: let you to perform mouse operations using either one or two interactive pens One User/Pen: lets you use the pen input and Ink features on Windows Vista, Windows 7 and Windows 8.
Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the screen Startup Screen A/V Mute Toolbars Pen Mode Icon Projector Control Display Background: selects the screen color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts up A/V Mute: selects the screen color or logo to display when A/V Mute is turned on Toolbars: controls
Setting Options Description Projection Front Selects the way the projector faces the screen so the image is oriented correctly Front/Ceiling Rear Rear/Ceiling Operation Direct Power On Selects various operation options High Altitude Mode Direct Power On: lets you turn on the projector without pressing the power button Startup Source Search Auto Power On High Altitude Mode: regulates the projector’s operating temperature at altitudes above 4921 feet (1500 m) Startup Source Search: automatically d
Setting Options Description A/V Settings A/V Output Selects the following when the projector is in standby mode (turned off): Audio Output HDMI Audio Output A/V Output: the Always On setting indicates that the projector outputs audio and video signals even while it is in standby mode; available only when Standby Mode is set to Communication On Audio Output: selects the audio input port when projecting images from the Computer1, Computer2, S-Video, Video, and USB-A ports HDMI Audio Output: selects whi
Setting Options Description Language Various languages available Selects the language for projector menu and message displays (not changed by Reset option) Parent topic: Adjusting the Menu Settings Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network.
Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN Sys. Antenna Level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Net.
Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a power-saving setting, a leaf icon appears next to the menu item.
Setting Options Description Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode A/V Mute Timer On Automatically turns off the projector after 30 minutes if A/V Mute is enabled Off Standby Mode Communication On Communication Off Enable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) • Output audio from a
Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Select Version to display the projector's firmware version. Select Info to display the settings described below. Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours.
Information item Description Refresh Rate Displays the refresh rate of the current input source Sync Info Displays information that may be needed by a service technician Status Displays information about projector problems that may be needed by a service technician Serial Number Displays the projector's serial number Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code List Parent topic: Adjusting the Menu Settings Rela
Event ID code Cause and solution 0483 The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again. 04FE 0479 A projector system error has occurred. Turn the projector off and then on again. 04FF 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option.
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue.
Cleaning the Air Filter and Vents Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them. 1. Turn off the projector and unplug the power cord. 2. Place your finger into the groove at the top of the air filter cover and pull to open the cover. 3. Pull the air filter out of the projector.
4. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 5. Place the air filter back in the projector as shown.
6. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a table. 1. Turn off the projector and unplug the power cord.
2. Place your finger into the groove at the top of the air filter cover and pull to open the cover. 3. Pull the air filter out of the projector. Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations.
4. Place the new air filter in the projector as shown. 5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related references Optional Equipment and Replacement Parts Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
Projector Lamp Specifications Projector Information Display - Info Menu Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary. 1. Turn off the projector and unplug the power cord. 2. Allow the projector lamp to cool down for at least one hour. 3.
4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
6. Grasp the raised section of the lamp and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.
8. Push in the lamp firmly and tighten the screws to secure it. Caution: Do not over-tighten the screws. 9. Replace the lamp cover and tighten the screw to secure it.
Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
6. Press Menu or Esc to exit the menus. Parent topic: Projector Lamp Maintenance Related references Projector Reset Options - Reset Menu Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Remove the battery cover as shown. 2.
3. Insert the batteries with the + and – ends facing as shown. 4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Transporting the Projector The projector contains precision parts, some of which are glass.
• When transporting the projector a long distance or as checked luggage, pack it in a firm box with cushioning around it and mark the box "Fragile." • When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Solving Interactive Problems Solving Network Problems Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on.
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. 1 Power light 2 Status light 3 Lamp light 4 Temp (temperature) light Power light Status light Lamp light Temp light Status and solution Blue Blue Off Off Normal operation. Blue Flashing blue Off Off Warming up. Wait for an image to appear. Blue Off Off Off Standby or sleep mode.
Power light Status light Lamp light Temp light Status and solution Blue Varies Off Projector is too hot. Flashing orange • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • Make sure the environmental temperature is not too hot. Off Flashing blue Off Orange Projector has overheated and turned off. Leave it turned off to cool down.
Power light Status light Lamp light Temp light Status and solution Flashing blue Varies Flashing orange Varies Replace the lamp soon to avoid damage. Do not continue using the projector. Off Flashing blue Off Flashing orange A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help. Off Flashing blue Flashing orange Flashing orange Auto Iris error. Turn the projector off, unplug it, and contact Epson for help.
5. When you are finished, do one of the following: • To select another problem to solve, press Esc. • To exit the help system, press Help. Parent topic: Solving Problems Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected images or sound.
• If the projector does not respond when you press the control panel buttons, the buttons may be locked. Unlock the buttons. • If the projector does not respond when you press buttons on the remote control, make sure the remote receivers are turned on. • For images projected with Windows Media Center, reduce the screen size from full screen mode. • For images projected from applications using Windows DirectX, turn off DirectX functions.
Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source Search button and wait a few seconds for an image to appear. • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary. • Check the connection from the projector to your video sources. • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
Solutions When "Not Supported" Message Appears If the "Not Supported" message appears, try the following solutions: • Make sure the correct input signal is selected on the Signal menu. • Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer. (See your computer manual for details.
• Adjust the Quick Corner or Keystone setting to correct the image shape. Note: Adjusting Quick Corner and Keystone settings may affect focus and pen calibration. Parent topic: Solving Image or Sound Problems Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector.
Displaying From a Mac Laptop Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus. • Clean the projector lens. • Position the projector close enough to the screen, and directly in front of it. • Position the projector so the keystone adjustment angle is not so wide that it distorts the image. • Adjust the Sharpness setting to improve image quality.
• Position the projector close enough to the screen. • If the image has been progressively darkening, you may need to replace the projector lamp soon.
Solutions to Microphone Problems If there is no sound when you use a microphone connected to the projector, try the following solutions: • Make sure the microphone is securely connected to the projector. • Make sure you are using a dynamic microphone, not a condenser microphone. • Adjust the Mic Input Level setting as necessary in the projector's menus. • If you want to use the microphone when the projector is off, set the Standby Mode option to Communication On and the A/V Output option to Always On.
• If the projector's lamp shuts off and the power and Temp lights are red, the projector has overheated and shut off. Check the solutions for this light status. • If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receiver setting is turned on in the projector's menu, if available.
Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. Do not attempt to enter the password again. Provide the request code and proof of ownership for assistance in unlocking the projector.
• If you are projecting from a laptop computer, make sure the battery has enough power, or connect the laptop to a power outlet. • If your USB cable is installed in the wall, try connecting a different USB cable to the projector and your computer.
• Make sure the USB Type B option on the Extended menu is set to Easy Interactive Function or USB Display/Easy Interactive Function. • Make sure you have calibrated the system. Try recalibrating. • Make sure the Pen Mode and Pen Operation Mode settings are set correctly in the Easy Interactive Function options on the Extended menu.
• Press the Pen Mode button on the remote control to toggle between PC Interactive and PC Free Annotation modes. Parent topic: Solving Interactive Problems Related concepts Pen Calibration Related references Projector Setup Settings - Extended Menu Solutions When the Interactive Pen Position Is Not Accurate If the pen position is not the same as the mouse pointer, try the following solutions: • Make sure you have calibrated the system. Try manual calibration. • Try adjusting the pen operation area.
• For the best performance, connect your computer to the projector using a VGA or HDMI cable for display and the USB cable for interactivity. • If you are using a computer, try setting your computer's display to 1280 × 800. • If you are using USB Display in Windows, you may need to disable Windows Aero in the Epson USB Display Settings program on your computer.
• Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu or in the network software. • Set the Standby Mode setting to Communication On so the network software can monitor the projector in standby mode.
Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday and 7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Technical Specifications These sections list the technical specifications of your projector.
Image size 39 inches (0.99 m) to 116 inches (2.95 m) (in native aspect ratio) Projection distance 21.3 inches (0.54 m) to 48 inches (1.22 m) (in native aspect ratio) Projection methods Front, rear, ceiling-mounted Optical aspect ratio 16:10 (width-to-height) Focus adjustment Manual Zoom adjustment Digital Zoom ratio 1.0 to 1.
Lamp life Normal Power Consumption mode: Up to about 5000 hours ECO Power Consumption mode: Up to about 10000 hours Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Parent topic: Technical Specifications Remote Control Specifications Reception range 19.
Power consumption Operating: (100 to 120 V) Normal Power Consumption mode: 315 W ECO Power Consumption mode: 230 W Standby: 1.90 W (Networked Standby), 0.22 W (Energy Saving) Power consumption Operating: (220 to 240 V) Normal Power Consumption mode: 298 W ECO Power Consumption mode: 221 W Standby: 2.10 W (Networked Standby), 0.
Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 Parent topic: Technical Specifications Supported Video Display Formats For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Display format Refresh rate (in Hz) Resolution (in pixels) MAC16" 75 832 × 624 MAC19" 75 1024 × 768 59 1024 × 768 75 1152 × 870 TV (NTSC) 60 720 × 480 TV (SECAM) 50 720 × 576 TV (PAL) 50/60 720 × 576 SDTV (480i) 60 720 × 480 SDTV (576i) 50 720 × 576 SDTV (480p) 60 720 × 480 SDTV (576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 VGA 60 640 × 480 SVGA 60 800 × 600 XGA 60 1024 × 768 WXGA 60 1280 × 800 60 1366 × 768 WXGA+ 60 1
Display format Refresh rate (in Hz) Resolution (in pixels) SXGA+ 60 1400 × 1050 UXGA 60 1600 × 1200 SDTV (480i/480p) 60 720 × 480 SDTV (576i/576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 * Wide resolution only Parent topic: Technical Specifications USB Display System Requirements Your computer system must meet the system requirements here to use the projector's USB Display software.
Requirement Windows Mac CPU Mobile Pentium III 1.2 GHz or faster (1.6 GHz or faster recommended) Power PC G4 1 GHz or faster (Core Duo 1.
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal.
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. • Do not place the projector on an unstable cart, stand, or table. • Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector more than 7° forward or back.
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation. • You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector.
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress. Do not bring your face close to the projector while it is in use.
Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care, please make your own judgment on this product's suitability after a full evaluation.
Trademarks EPSON®, EasyMP®, Instant Off®, PowerLite®, and Quick Corner® are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Accolade® and PrivateLine® are registered trademarks, and Extra CareSM is a service mark of Epson America, Inc. Mac, OS X and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC.
iptables-1.4.4 libgcc1(gcc-4.3.3) libstdc++-6.0.10 linux-2.6.27 patches udhcp 0.9.8 uvc rev.219 wireless_tools 29 EPSON original drivers The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses/. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (c) 1989, 1991 Free Software Foundation, Inc.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8.
DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it.
Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs.
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6.
with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.
, 1 April 1990 Ty Coon, President of Vice That's all there is to it! BSD License (Berkeley Software Distribution License) This projector product includes the open source software program "University of California, Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License".
libjpeg This projector product includes the open source software program "libjpeg" which applies the terms and conditions provided by owner of the copyright to the "libjpeg". The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libjpeg programs libjpeg-6b License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg" are as follows. Copyright (c) 1994-1997, Thomas G. Lane.
(2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG Group". (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library.
This projector product includes the open source software program "libpng" which applies the terms and conditions provided by owner of the copyright to the "libpng". The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libpng programs libpng-1.2.49 License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows.
Glenn Randers-Pehrson Willem van Schaik libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated. A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.
3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly jloup@gzip.org Mark Adler madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
4. Redistribution.
8. Limitation of Liability.
The "aes-src-29-04-09" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of es-src-29-04-09 programs newlib This projector product includes the open source software program "newlib" which applies the terms and conditions provided by owner of the copyright to the "newlib". The "newlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of newlib programs newlib 1.17.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
ANY OF ITS ENTITIES BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. (4) Advanced Micro Devices Copyright 1989, 1990 Advanced Micro Devices, Inc.
Developed at SunPro, a Sun Microsystems, Inc. business. Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is preserved.
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (12) SuperH, Inc. Copyright 2002 SuperH, Inc.
THIS SOFTWARE IS PROVIDED BY KTH AND ITS CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Copyright (c) 1984,2000 S.L. Moshier Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software. THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
IN NO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE, LOSS OF BUSINESS, LOSS OF PROFITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. IN NO EVENT SHALL INTEL'S TOTAL LIABILITY EXCEED THE SUM PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER. (26) Mike Barcroft Copyright (c) 2001 Mike Barcroft All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
(35) - ARM Ltd (arm and thumb variant targets only) Copyright (c) 2009 ARM Ltd All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED.
MIT License This projector product includes the open source software program which applies the terms and conditions provided by owner of the copyright to the "MIT License". The "MIT License" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of MIT License programs jquery-1.7.2.min.js jquery-ui-1.8.20.custom.zip jquery.ui.touch-punch.js jquery.upload-1.0.2.min.
License terms of conditions of each program which are provided by owner of the copyright to the "TOPPERS/JSP" are as follows. TOPPERS/JSP Kernel Toyohashi Open Platform for Embedded Real-Time Systems/ Just Standard Profile Kernel Copyright (C) 2000-2003 by Embedded and Real-Time Systems Laboratory Toyohashi Univ. of Technology, JAPAN Copyright (C) 2004 by Embedded and Real-Time Systems Laboratory Graduate School of Information Science, Nagoya Univ., JAPAN.
Note: The TOPPERS License has been revised several times; what is shown above is the latest version that is to be applied to software made public hereafter. TINET This projector product includes the open source software program "TINET" which applies the terms and conditions provided by owner of the copyright to the "TINET". The "TINET" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of TINET programs tinet-1.4.
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (6) TINET and TOPPERS TINET (TCP/IP Protocol Stack) Copyright (C) 2001-2006 by Dep. of Computer Science and Engineering Tomakomai National College of Technology, JAPAN TINET (TCP/IP Protocol Stack) Copyright (C) 2001-2006 by Dep.
Foundation, consents to the use, reproduction, alteration, and redistribution (hereafter called utilization) of this software (this software includes alterations, likewise below) without compensation. (1) When this software is utilized in the form of source code, the above copyright declaration, these conditions of utilization, and the following stipulation of no guarantee shall be included in unchanged form inside the source code.
This information is subject to change without notice. A Note Concerning Responsible Use of Copyrighted Materials Copyright Attribution Parent topic: Notices A Note Concerning Responsible Use of Copyrighted Materials Epson encourages each user to be responsible and respectful of the copyright laws when using any Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in certain circumstances, those circumstances may not be as broad as some people assume.
