Installation Guide

If you need to install the Easy Interactive Tools
software, do one of the following:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function.”
• Download the most up-to-date version from:
epson.com/brightlinkdownloads (U.S.)
epson.ca/brightlinkdownloads (Canada)
global.latin.epson.com/soporte (Latin America;
site available in Spanish).
For more information about Easy Interactive Tools, see
the online Easy Interactive Tool Tips sheet or the online
Easy Interactive Tools Operation Guide.
Note: To use third party annotation software, tap the
screen with the pen to activate the projector’s built-in
toolbar, then tap the or icon to open it. Tap the
icon to activate mouse control and use your third
party software.Ready to Learn More?
2 Make Sure Interactive Software Is Installed
3 Calibrate
5
Display an image from your computer. If the image
doesn’t appear, try one of the following:
• On some Windows laptops, you may need to
hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on
an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On a Mac, you may need to open System
Preferences and select Displays. Click the
Arrangement tab and select the Mirror
Displays check box.
• Try pressing the Source Search button on the
remote control.
1 Connect Your Computer and
Turn on the Projector
You may already have interactive software on your
computer, or you may need to install it. For OS X, you
need the Easy Interactive Driver and Easy Interactive
Tools (or other interactive software). For Windows, you
only need Easy Interactive Tools (or other interactive
software).
Here’s how to find out if the Easy Interactive Tools
software is installed on your computer. (If the software is
not installed, follow the steps in the next column.)
OS X:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Applications folder on your hard drive.
If you see these folders, the Easy Interactive software is
installed.
Windows 8.x:
Navigate to the Apps screen and select Easy Interactive
Tools.
Other Windows versions:
Select or Start > All Programs or Programs >
EPSON Projector > Easy Interactive Tools Ver. 3.
If you see Easy Interactive Tools Ver. 3, the software
is installed.
If the pen position and cursor location don’t match, you
can try auto calibration, or you can calibrate manually for
even greater accuracy. You don’t need a computer, and
you won’t need to calibrate again unless the projector or
image is moved, or the image is resized.
1
To start calibration, do one of the following:
• Press the User button to start auto calibration,
then wait until calibration is complete.
• Follow the steps below to calibrate manually.
2
Press the Menu button on the remote control, select
the Extended menu, and press .
3
Select the Easy Interactive Function setting and
press .
4
Select Manual Calibration, then press .
5
When you see this screen, press to select Yes.
6
Touch the circles on the screen with the pen to
perform manual calibration.
For more detailed instructions, see the online BrightLink
User’s Guide.
Using the Remote
Control
Select from various
image sources
connected to the
projector
Switch between
computer and
interactive pen
Enter
Zoom in and out
Stop video action
Turn projector
on/off
Access menu
system for
additional
adjustments
Calibrate
Page through
documents
Temporarily
turn off image
and sound
For more information on using the remote control:
• See the online BrightLink User’s Guide.
• Go to the training section and watch a video or two at
epson.com/brightlinkvideos (U.S.) or
epson.ca/brightlinkvideos (Canada).
1
Connect the USB cable from the projector’s USB-B
port directly to any available USB port on your
computer.
USB cable
2
Connect an HDMI or VGA cable from the projector to
your computer.
HDMI
VGA
3
Turn on the projector by pressing the power
button on the remote control.
In Windows
®
, you may see messages about device
drivers or new hardware.
4
The default language of the menu system is English.
To select another language, press the Menu button
on the remote control. Select Extended and press
. Select Language and press . Select your
language and press . Press the Menu button to
exit the menu system.