Connection Guide

3
The built-in toolbar will be available on equipment connected to the other (non-selected)
sources, providing PC-free annotation (single-pen support). Use the remote control to
switch sources.
Connecting Through a Network
If both the projector and computer are connected to the same network by Ethernet
®
cable, users can project through the network. You must install the EasyMP Network
Projection software on the computer (Windows
®
or Mac
®
). This software is available on
the
EPSON Projector Software CD that came with the projector or at
epson.com/brightlinkdownloads.
For full computer interactivity (using Easy Interactive Tools software), you also need to
connect a USB cable from the computer to the projector and select
LAN as the source, as
described on page 2.
If your network includes a wireless router, users can connect to the projector wirelessly from
computers (using EasyMP Network Projection software). Users can also connect wirelessly
from an iPad
®
, iPhone
®
, or iPod
®
touch using the optional EPSON iProjection
™
app.
When the projector is connected to these devices, only the built-in toolbar is available (single
pen support).
If the projector is not connected to a network (or the network does not include a wireless
router), you can purchase the optional wireless LAN module for the projector. This will allow
wireless projection directly from a computer to the projector and use of the built-in interactive
toolbar.
You can purchase the optional wireless LAN module (part number V12H418P12)
from an EPSON
®
authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
Wireless network connection with
interactivity using the built-in toolbar
Wireless router
or access point