Operation Guide

Error Messages Remedy
Failed to update the projector information. Check the network settings for your computer and
the projector, and then try again.
The projector cannot be found. Check the network settings for your computer and
the projector, and then try again.
Parent topic: Error Messages List
Related references
Solutions When You Cannot Update Firmware or Copy Menu Settings
Related tasks
Canceling an Update Schedule
Updating the Firmware
Copying Projector Menu Settings Using Batch Setup
Error Messages When Using Batch Setup
Error Messages Remedy
The projector is being updated. Try again after Wait until the update is completed before using
the update is completed. any EasyMP Network Updater features.
Failed to apply projector settings. Make sure the projector is on or the projector's
Standby Mode is set to Communication On. Also
make sure you select the correct projector, and
then apply the settings again.
Failed to read projector settings from the Make sure the projector is on or the projector's
selected projector. Standby Mode is set to Communication On, then
click Refresh on the Edit Projector List screen.
Then copy the menu settings again.
Parent topic: Error Messages List
Related tasks
Copying Projector Menu Settings Using Batch Setup
36