Quick Guide

Quick Projector Setup 5
6. Launch Easy Interactive Driver on your computer. You should see the
pen icon in lower right corner of your screen (Windows
®
) or in the Dock
(Mac OS
®
). If you don’t see the icon, see page 14 or do one of the following:
■ Windows: select or Start > All Programs or Programs > Epson
Projector
> Easy Interactive Driver.
■ Mac OS: open the Applications folder, then select the Easy Interactive
Driver
icon.
7. Calibrate your system (see page 15).
■ Windows: click the pen icon in the system tray on your taskbar
(lower right corner of your screen), then select
Calibrate (Normal).
■ Mac OS: click the pen icon in the Dock, select Calibrate from the
menu bar, then select
Calibrate (Normal).
■ After you read the message about calibration, click
OK.
■ Use the interactive pen to touch each flashing green
circle as it appears. Continue until all the circles stop
flashing and turn black.
■ Hold the pen at an angle, and make sure you are not casting a shadow on
the pen.
■ If you make a mistake, press Esc on your computer keyboard and restart
calibration.
8. Launch TeamBoard Draw (see page 18).
■ Windows: select or Start > All Programs or Programs >
Teamboard > Annotation.
■ Mac OS: Select the TeamboardAnnotate icon on your screen.
You see the TeamBoard Draw dashboard:
Collapse
dashboard
Open drawing
toolbar
Use virtual keyboard
Select Freehand or
Rectangle to capture screen
Open
application
list
Open whiteboard screen