Quick Guide

Introduction

Your BrightLink

™

455Wi projector turns any wall into an interactive whiteboard.

After your projector has been installed, read this booklet to:

■ Install the software on your computer

■ Connect the cables to your computer

■ Use the remote control

■ Turn on the projector and adjust the image

■ Launch the Easy Interactive Driver

■ Calibrate and use the pens

■ Launch TeamBoard Draw

■ Solve basic problems

This booklet explains how to use the projector with a laptop or other computer.

You can also connect the projector to video players, document cameras, or other

equipment. For additional information, see the on-screen User’s Guide. For

network information, see the on-screen EasyMP

Network Projection Operation

Guide included on the BrightLink 455Wi CD.

Before using the projector, make sure you read the safety instructions in the on-

screen User’s Guide on the projector CD.

Please follow these guidelines as you read your projector instructions:

Warning:

Warnings must be followed carefully to avoid bodily injury.

Caution:

Cautions must be observed to avoid damage to your equipment.

Note:

Notes contain important information about your projector.

English