Quick Guide

Problems and Solutions 23
■ If you see a No Signal message and you’re using a Macintosh:
1. Open
System Preferences.
2. Click
Display or Displays.
3. Click
Detect Displays.
4. Do one of the following:
Mac OS X 10.6.x: Click
Show displays in menu bar.
Other versions of Mac OS X: Make sure the
VGA Display or Color LCD
dialog box is selected, click the
Arrangement or Arrange tab, then make
sure the
Mirror Displays checkbox is selected.
Interactive Pen Problems
■ Make sure the USB cable is securely connected to the projector and computer.
Try disconnecting and reconnecting the cable to your computer.
■ If you don’t see the pen icon on your taskbar (Windows) or in the Dock
(Mac OS), do one of the following:
Windows: Select
or Start > All Programs or Programs > EPSON
Projector
> Easy Interactive Driver.
Macintosh: Open the Applications folder, then select the
Easy Interactive
Driver
icon.
■ If you see a red X on the pen icon, the computer and projector are not
connected correctly. Try removing and reconnecting the USB cable.
■ Make sure the pen batteries have enough power. If the light on the pen doesn’t
turn green when you press the button, you need to replace the batteries.
■ Make sure you are not casting a shadow on the projection surface, and
nothing is blocking the signal between the pen and the interactive receiver on
the projector. The cable cover should be attached to the projector to keep the
cables out of the way.
■ Dim the room lights and turn off any fluorescent lights. Make sure the
projection surface and the pen receiver are not in direct sunlight or other
sources of bright lighting.
■ For easier operation, hold the pen at an angle to the projection surface.