Operation Guide

Using Set options
37
Adjust performance tab
Display Connec-
tion Mode
Selection window
on startup
Set whether or not the Quick Connection
Mode/Advanced Connection Mode screen is
displayed when EasyMP Network Projection starts.
Clear this checkbox once you have settled on a
regular startup method.
Set whether or not the Quick Connection
Mode/Advanced Connection Mode screen is
displayed when EasyMP Network Projection starts.
Because this projector always starts in Advanced
Connection Mode, clear this checkbox.
Search method on
startup
Select from the following projector search
methods executed when EasyMP Network
Projection is started.
Automatic search on startup
Specify search method after startup
Search with the last network configuration
Edit profile
The Edit profile dialog box is displayed. s p.34
Switch LAN
Windows only
The Switch Network Adapter dialog box is
displayed. This is used when it is necessary to
switch the network adapter to be used for a search
when a computer has multiple adapters.
By default, all of the network adapters are used to
perform a search. When a Wired LAN is always used
as the connection method, select a Wired LAN
adapter.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
settings for Edit profile and Switch LAN in General
settings.
Performance
adjustment slider
The performance can be set to Fast, Normal, and
Fine.
Set to Fast when movie projections are
interrupted.
Transfer layered
window
Windows only (excluding Windows Vista and
Windows 7)
Set whether or not to transfer a layered window.
The layered window is in use when contents such
as messages displayed on the computer are not
projected by the projector. Select this checkbox to
project contents such as messages that use the
layered window.
Clear this checkbox if you do not want the mouse
pointer to flicker on the screen.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
settings for Edit profile and Switch LAN in General
settings.