Quick Guide

3
Introduction
After your projector has been mounted on the wall, read this booklet to:
Install the software on your computer
Connect the cables to your computer
Use the remote control
Turn on the projector and adjust the image
Calibrate and use the pens
Use Easy Interactive Tools
Solve basic problems
This booklet explains how to use the projector with a laptop or other computer.
You can also connect the projector to video players, document cameras, or other
equipment. For additional information, see the on-screen User’s Guide. For
network information, see the on-screen EasyMP
®
guides included on the
BrightLink
450Wi CD.
Before using the projector, make sure you read the safety instructions in the on-
screen User’s Guide on the projector CD.
Please follow these guidelines as you read your projector instructions:
Warning:
Warnings must be followed carefully to avoid bodily injury.
Caution:
Cautions must be observed to avoid damage to your equipment.
Note:
Notes contain important information about your projector.
English