User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Using the Control Panel
- Adjusting the Screen Brightness
- Adjusting Control Panel Sounds
- Selecting the Date and Time
- Changing LCD Screen Language
- Changing the Keyboard Layout
- Adjusting the Operation Time Out Setting
- Preventing PC Connection via USB
- Setting Direct Power On
- Customizing the Control Panel Display
- Changing Regular Cleaning Alert Settings
- Changing Roller Replacement Alert Settings
- Setting User Access Restrictions (Access Control)
- Setting Up Epson Connect Services
- Scanner Parts Locations
- User Replaceable Epson Scanner Parts
- Using Power Saving Settings
- Using the Epson Smart Panel Mobile App
- Loading Originals
- Wi-Fi Networking
- Scanning
- Starting a Scan
- Starting a Scan from a Smart Device
- Scanning a Document in Epson ScanSmart
- Selecting Epson ScanSmart Settings
- Scanning Using Invoice/Receipt Manager
- Selecting Invoice/Receipt Manager Settings
- Scan Resolution Guidelines
- Cleaning and Transporting Your Scanner
- Solving Problems
- Product Status Messages
- Solving Scanning Problems
- Scanner Does Not Turn On or Turns Off Unexpectedly
- Scanner Button Does Not Work as Expected
- Scanning Software Does Not Operate Correctly
- Original Feeds Incorrectly in Scanner
- Original Jams in Scanner
- Paper Protection Does Not Work Correctly
- Scanning is Slow
- Cannot Send Scans to a Cloud Service
- Cannot Send Scans to an Email
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Resetting the Epson Scan 2 Settings
- Solving Invoice/Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices
78
4. Select Memory Device.
5. Change any of the displayed settings on the Basic Settings tab as necessary.
6. Select the Advanced tab to view and change additional scan settings, if necessary.
Note: Tap the icon if you want to save your settings as a preset.
7. Tap the icon and check the scanner settings or make changes, if necessary.
8. Select the start icon to start scanning.
Your product scans your original and saves the scanned file to the external USB device.
Parent topic: Starting a Scan
Setting Up a WSD Port (Windows 7)
You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first
set up a WSD port on your Windows 7 system (the port is set up automatically on Windows 10 and
Windows 8.x).
Before you set up a WSD port, make sure you installed your product software, and connected your
product and computer to the same network.
1. Turn on your product.
2. Click and select Computer.
3. On the left side of the window, select Network.
4. Locate your product on the Network screen, right-click it, and select Install.
5. When you see the User Account Control screen, click Continue.
Note: If you see an Uninstall screen, click Uninstall and repeat these steps as necessary.
6. When you see the message Your device is ready to use in the Windows taskbar, click the
message.
7. On the Driver Software Installation screen, make sure your product is listed as Ready to use. Then
click Close.
8. Click and select Devices and Printers.
9. Make sure that an icon appears for your product's name on the network.