User's Manual

76
5. Do one of the following:
• To select frequently used addresses, tap the icons displayed on the screen.
• To enter the folder path directly, select Keyboard, enter an email address, and select OK.
• To select a contact from the contacts list, select Contacts, select a contact or group, and then
select Close. You can tap the icon to create a new contact, or search for a contact in the
contacts list. Enter the search keyword into the box at the top of the screen.
• To select a recently used contact, select History, select a contact, and then select Close.
Note: The number of recipients you selected is displayed on the right side of the screen. You can
send emails to up to 10 contacts and groups. If groups are included in the contacts list, you can
select up to 200 individual addresses in total, taking addresses within the groups into account.
Select the address box at the top of the screen to display the list of selected addresses.
6. Select the Scan Settings tab, and select the desired settings.
Note: Tap the icon if you want to save your settings as a preset.
7. Tap the icon and check the scanner settings or make changes, if necessary.
8. Select the start icon to start scanning.
Parent topic: Starting a Scan
Scanning to the Cloud
You can use the control panel to send your scanned files to a destination that you have registered with
Epson Connect.
Note: Make sure to set up your product using Epson Connect before using this feature.
1. Place your original on the product for scanning.
2. Select home, if necessary.
3. Select Cloud.
Note: You must register your product with Epson Connect to select a destination.