User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Using the Control Panel
- Adjusting the Screen Brightness
- Adjusting Control Panel Sounds
- Selecting the Date and Time
- Changing LCD Screen Language
- Changing the Keyboard Layout
- Adjusting the Operation Time Out Setting
- Preventing PC Connection via USB
- Setting Direct Power On
- Customizing the Control Panel Display
- Changing Regular Cleaning Alert Settings
- Changing Roller Replacement Alert Settings
- Setting User Access Restrictions (Access Control)
- Setting Up Epson Connect Services
- Scanner Parts Locations
- User Replaceable Epson Scanner Parts
- Using Power Saving Settings
- Using the Epson Smart Panel Mobile App
- Loading Originals
- Wi-Fi Networking
- Scanning
- Starting a Scan
- Starting a Scan from a Smart Device
- Scanning a Document in Epson ScanSmart
- Selecting Epson ScanSmart Settings
- Scanning Using Invoice/Receipt Manager
- Selecting Invoice/Receipt Manager Settings
- Scan Resolution Guidelines
- Cleaning and Transporting Your Scanner
- Solving Problems
- Product Status Messages
- Solving Scanning Problems
- Scanner Does Not Turn On or Turns Off Unexpectedly
- Scanner Button Does Not Work as Expected
- Scanning Software Does Not Operate Correctly
- Original Feeds Incorrectly in Scanner
- Original Jams in Scanner
- Paper Protection Does Not Work Correctly
- Scanning is Slow
- Cannot Send Scans to a Cloud Service
- Cannot Send Scans to an Email
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Resetting the Epson Scan 2 Settings
- Solving Invoice/Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices
69
6. Select PIN Code Setup(WPS).
7. Follow the instructions on the LCD screen to complete WPS setup.
Note: Make sure you press Start Setup within two minutes of activating WPS on your router.
8. Select the return home icon to return to the home screen.
The Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the product
is not connected to the network, repeat these steps to try again.
Parent topic: Wi-Fi Protected Setup (WPS)
Related tasks
Setting Up Network Scanning
Setting Up Network Scanning
You can set up network scanning to your scanner through a direct connection to your scanner.
First, manually configure your scanner to connect to your network. Then follow the instructions here to
set up your computer for network scanning using the Epson Scan 2 Utility. Your scanner must be turned
on and connected to the network.
Note: Make a note of the IP address or host name of the scanner so you can enter it in these steps.
1. Do one of the following to start the Epson Scan 2 Utility:
• Windows 10: Click > EPSON > Epson Scan 2 Utility.
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
• Windows 7: Click > All Programs > EPSON > Epson Scan 2 > Epson Scan 2 Utility.
• Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility.
2. Select Settings from the Scanner drop-down list.