User's Manual

40
• 215 to 240 inches (5461 to 6096 mm): 200 dpi or less
8. If necessary during scanning, adjust the position of the stopper on the output tray extension to fit the
ejected originals.
Note: If thicker paper does not eject properly or falls from the output tray, push in the output tray and
allow the originals to eject freely onto the surface below the scanner. If the scanned images are
affected by the originals ejecting below the scanner, try placing the scanner on the edge of a table
where the ejected originals can drop freely.
If scanning thin or wrinkled paper causes paper jams or double feeds, slow down the feeding speed by
selecting Settings > Scanner Settings > Slow > On on the LCD screen.
If a paper feed error is detected, the Paper Protection feature stops the scanning process automatically
to reduce damage to the original. To change the Paper Protection detection level, select Settings >
Scanner Settings > Paper Protection on the LCD screen and select the desired level.