User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Using the Control Panel
- Adjusting the Screen Brightness
- Adjusting Control Panel Sounds
- Selecting the Date and Time
- Changing LCD Screen Language
- Changing the Keyboard Layout
- Adjusting the Operation Time Out Setting
- Preventing PC Connection via USB
- Setting Direct Power On
- Customizing the Control Panel Display
- Changing Regular Cleaning Alert Settings
- Changing Roller Replacement Alert Settings
- Setting User Access Restrictions (Access Control)
- Setting Up Epson Connect Services
- Scanner Parts Locations
- User Replaceable Epson Scanner Parts
- Using Power Saving Settings
- Using the Epson Smart Panel Mobile App
- Loading Originals
- Wi-Fi Networking
- Scanning
- Starting a Scan
- Starting a Scan from a Smart Device
- Scanning a Document in Epson ScanSmart
- Selecting Epson ScanSmart Settings
- Scanning Using Invoice/Receipt Manager
- Selecting Invoice/Receipt Manager Settings
- Scan Resolution Guidelines
- Cleaning and Transporting Your Scanner
- Solving Problems
- Product Status Messages
- Solving Scanning Problems
- Scanner Does Not Turn On or Turns Off Unexpectedly
- Scanner Button Does Not Work as Expected
- Scanning Software Does Not Operate Correctly
- Original Feeds Incorrectly in Scanner
- Original Jams in Scanner
- Paper Protection Does Not Work Correctly
- Scanning is Slow
- Cannot Send Scans to a Cloud Service
- Cannot Send Scans to an Email
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Resetting the Epson Scan 2 Settings
- Solving Invoice/Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices
176
• Never disassemble, modify, or attempt to repair the AC adapter by yourself except as specifically
explained in the scanner's guides.
• If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses in
the plug, make sure you replace them with fuses of the correct size and rating.
• Unplug the scanner and the AC adapter, and refer servicing to qualified service personnel under the
following conditions: The AC adapter or plug is damaged; liquid has entered the scanner or the AC
adapter; the scanner or the AC adapter has been dropped or the case has been damaged; the
scanner or the AC adapter does not operate normally or exhibits a distinct change in performance. (Do
not adjust controls that are not covered by the operating instructions.)
• Unplug the scanner and the AC adapter before cleaning. Clean with a damp cloth only. Do not use
liquid or aerosol cleaners.
• If you are not going to use the scanner for a long period, be sure to unplug the AC adapter from the
electrical outlet.
USB
• The USB cable is designed for use with the product with which it was included. Do not attempt to use it
with other electrical devices unless specified.
• The USB cable should be placed to avoid abrasions, cuts, fraying, crimping, and kinking.
• Do not place objects on top of the USB cable and do not allow the cable to be stepped on or run over.
Be particularly careful to keep the USB cable straight at the end.
• If you are not going to use the product for a long period, unplug the USB cable from the computer.
• Unplug the scanner and the USB cable, and refer servicing to qualified service personnel under the
following conditions: Liquid has entered the scanner; the scanner has been dropped or the case has
been damaged; the scanner does not operate normally or exhibits a distinct change in performance.
(Do not adjust controls that are not covered by the operating instructions.)
LCD Screen
• The LCD screen may have uneven brightness or a few small bright or dark spots. This is normal and
does not indicate damage.
• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.
• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash
them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.
• Do not press too hard on the LCD screen or subject it to heavy impacts.