User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Using the Control Panel
- Adjusting the Screen Brightness
- Adjusting Control Panel Sounds
- Selecting the Date and Time
- Changing LCD Screen Language
- Changing the Keyboard Layout
- Adjusting the Operation Time Out Setting
- Preventing PC Connection via USB
- Setting Direct Power On
- Customizing the Control Panel Display
- Changing Regular Cleaning Alert Settings
- Changing Roller Replacement Alert Settings
- Setting User Access Restrictions (Access Control)
- Setting Up Epson Connect Services
- Scanner Parts Locations
- User Replaceable Epson Scanner Parts
- Using Power Saving Settings
- Using the Epson Smart Panel Mobile App
- Loading Originals
- Wi-Fi Networking
- Scanning
- Starting a Scan
- Starting a Scan from a Smart Device
- Scanning a Document in Epson ScanSmart
- Selecting Epson ScanSmart Settings
- Scanning Using Invoice/Receipt Manager
- Selecting Invoice/Receipt Manager Settings
- Scan Resolution Guidelines
- Cleaning and Transporting Your Scanner
- Solving Problems
- Product Status Messages
- Solving Scanning Problems
- Scanner Does Not Turn On or Turns Off Unexpectedly
- Scanner Button Does Not Work as Expected
- Scanning Software Does Not Operate Correctly
- Original Feeds Incorrectly in Scanner
- Original Jams in Scanner
- Paper Protection Does Not Work Correctly
- Scanning is Slow
- Cannot Send Scans to a Cloud Service
- Cannot Send Scans to an Email
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Resetting the Epson Scan 2 Settings
- Solving Invoice/Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices
128
9. Wipe off any dust or dirt on the separation roller using a genuine Epson cleaning kit or a soft, moist
cloth.
Caution: Use only a genuine Epson cleaning kit or soft, moist cloth to clean the roller; using a dry
cloth may damage the surface of the roller.
10. To replace the separation roller, insert the end of the roller into the hole on the right side and lower
the other end of the roller into place.
11. Close the separation roller cover until you hear it click into place.
Note: If you are not able to close the cover, the roller is not installed correctly. Remove the roller and
reinstall it, then try to close the cover again.