User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Cleaning and Transporting Your Scanner
- Solving Problems
- Scanner Light Status
- Solving Scanning Problems
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Back of Original Image Appears in Scanned Image
- Scanned Characters are Blurry
- Characters are not Recognized During Conversion to Editable Text (OCR)
- Ripple Patterns Appear in an Image
- Spots or Lines Appear in All Scanned Images
- Straight Lines in an Image Appear Crooked
- Scanned Image is Cropped
- Resetting the Epson Scan 2 Settings
- Solving Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help
- Technical Specifications
- Notices
76
7. If the scanner is not clean after multiple cleanings with the dry cleaning sheet, repeat these steps
using the wet cleaning sheet from the optional maintenance sheet kit.
Note: You can use the wet cleaning sheet only once. If the scanner is still not clean after using the
wet cleaning sheet, contact Epson for support.
Parent topic: Cleaning and Transporting Your Scanner
Related references
User Replaceable Epson Scanner Accessories
Calibrating Your Scanner
If you notice any of the following image quality problems, you can calibrate the scanner using the
calibration sheet that came with it:
• Scanned images are blurry.
• Scanned colors differ from the colors in the original.
• Scanned images are darker or lighter than the original.
• Scanned images contain vertical lines.
Note: The illustration shows the ES-50/ES-55R, but the steps are the same for the ES-60W/ES-65WR.
1. Turn on the scanner and make sure it is connected to the computer.
Note: Make sure the scanner battery is not low or calibration will not start (ES-60W/ES-65WR).
2. Load the calibration sheet into the scanner with the arrows at the trailing edge of the sheet pointing
into the input slot.