User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Cleaning and Transporting Your Scanner
- Solving Problems
- Scanner Light Status
- Solving Scanning Problems
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Back of Original Image Appears in Scanned Image
- Scanned Characters are Blurry
- Characters are not Recognized During Conversion to Editable Text (OCR)
- Ripple Patterns Appear in an Image
- Spots or Lines Appear in All Scanned Images
- Straight Lines in an Image Appear Crooked
- Scanned Image is Cropped
- Resetting the Epson Scan 2 Settings
- Solving Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help
- Technical Specifications
- Notices
75
You can purchase genuine Epson accessories at epson.com (U.S. sales), epson.ca (Canadian sales), or
epson.com.jm (Caribbean sales). You can also purchase accessories from an Epson authorized reseller.
To find the nearest one, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada.
1. Turn on the scanner and make sure it is connected to the computer.
2. Load the dry cleaning sheet into the scanner.
3. Do one of the following to start the Epson Scan 2 Utility:
• Windows 10: Click > EPSON > Epson Scan 2 Utility
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
• Windows (other versions): Click or Start > All Programs or Programs > EPSON > Epson
Scan 2 > Epson Scan 2 Utility.
• Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility.
4. Click Maintenance.
5. Click Cleaning.
Note: Cleaning does not start if the battery level is low (ES-60W/ES-65WR).
The scanner feeds and ejects the cleaning sheet. Cleaning takes about 30 seconds.
6. If spots or lines remain, repeat these steps to clean it again.
Note: You can use the same dry cleaning sheet multiple times.