User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Cleaning and Transporting Your Scanner
- Solving Problems
- Scanner Light Status
- Solving Scanning Problems
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Back of Original Image Appears in Scanned Image
- Scanned Characters are Blurry
- Characters are not Recognized During Conversion to Editable Text (OCR)
- Ripple Patterns Appear in an Image
- Spots or Lines Appear in All Scanned Images
- Straight Lines in an Image Appear Crooked
- Scanned Image is Cropped
- Resetting the Epson Scan 2 Settings
- Solving Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help
- Technical Specifications
- Notices
12
Charging the Battery (ES-60W/ES-65WR)
The scanner runs on battery power when it is not connected to the computer with a USB cable, or if it is
connected via Wi-Fi. You can charge the battery from a computer with a USB connection to the scanner.
1. Make sure that the computer is turned on and not in sleep mode.
2. Connect the scanner to the computer using the micro USB cable that came with the scanner.
3. Slide the power switch to turn on the scanner.
The battery light flashes and shows the battery level while the battery is charging. When charging
is complete, the battery level is shown as full. If the scanner is off when charging completes, the
battery light turns off.
Note: The battery takes about 3.5 hours to fully charge. Charging times increase if the scanner is on
during the charging process.
Parent topic: Scanner Basics