User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Starting a Scan
- Scanning with Document Capture Pro in Standard View
- Scanning with Document Capture Pro in Simple View
- Scanning with Document Capture - Mac
- Scanning in Epson Scan 2
- Scan Resolution Guidelines
- Scanning Special Projects
- Scanning Two Originals onto One Sheet (Stitching Images)
- Scanning Multi-Page Originals as Separate Files - Windows
- Saving Scanned Documents as a Searchable PDF Using Epson Scan 2
- Saving Scanned Documents as a Searchable PDF with Document Capture - Mac
- Saving a Scan as an Office Format File - Windows
- Saving a Scan as an Office Format File - Mac
- Scanning to a SharePoint Server or Cloud Service - Windows
- Cleaning and Transporting Your Scanner
- Solving Problems
- Technical Specifications
- Notices
50
3. Turn on the scanner.
4. Press and hold the Wi-Fi connect button on the scanner for at least 3 seconds, then release it
when the ready and Wi-Fi lights flash alternately.
Note: If you do not complete this step within 2 minutes, repeat steps to try again.
When the ready and Wi-Fi lights on the scanner stay on, the scanner is connected to the
network.
Note: If the ! error light turns on, the connection failed. Press the stop button to clear the error,
restart the scanner and router, and repeat these steps.
5. Select the link below to set up network scanning. You must set up network scanning to connect your
computer and wireless scanner.
Parent topic: Wi-Fi Protected Setup (WPS)