User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Starting a Scan
- Scanning with Document Capture Pro in Standard View
- Scanning with Document Capture Pro in Simple View
- Scanning with Document Capture - Mac
- Scanning in Epson Scan 2
- Scan Resolution Guidelines
- Scanning Special Projects
- Scanning Two Originals onto One Sheet (Stitching Images)
- Scanning Multi-Page Originals as Separate Files - Windows
- Saving Scanned Documents as a Searchable PDF Using Epson Scan 2
- Saving Scanned Documents as a Searchable PDF with Document Capture - Mac
- Saving a Scan as an Office Format File - Windows
- Saving a Scan as an Office Format File - Mac
- Scanning to a SharePoint Server or Cloud Service - Windows
- Cleaning and Transporting Your Scanner
- Solving Problems
- Technical Specifications
- Notices
161
ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere
rating.
• Never disassemble, modify, or attempt to repair the AC adapter by yourself except as specifically
explained in the scanner's guides.
• If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses in
the plug, make sure you replace them with fuses of the correct size and rating.
• Unplug the scanner and the AC adapter, and refer servicing to qualified service personnel under the
following conditions: The AC adapter or plug is damaged; liquid has entered the scanner or the AC
adapter; the scanner or the AC adapter has been dropped or the case has been damaged; the
scanner or the AC adapter does not operate normally or exhibits a distinct change in performance. (Do
not adjust controls that are not covered by the operating instructions.)
• Unplug the scanner and the AC adapter before cleaning. Clean with a damp cloth only. Do not use
liquid or aerosol cleaners.
• If you are not going to use the scanner for a long period, be sure to unplug the AC adapter from the
electrical outlet.
Parent topic: Notices
Battery Safety Instructions (ES-300W/ES-300WR)
• The battery is not fully charged at the time of purchase. Charge the battery fully before using the
scanner on battery power.
• Always charge the battery within a temperature range of 46°F to 95°F (8°C to 35°C). The battery
cannot charge or may deteriorate if you charge it in an environment outside of this range.
• If the battery is not fully charged within the specified time, stop charging. Otherwise, the battery could
become hot, emit smoke, rupture, or catch fire.
• If you are not using the scanner, charge the battery using the AC adapter on a regular basis (at least
once every six months) to avoid letting the battery run out.
• Turn off the scanner when not in use or set the scanner to turn off automatically to save battery power.
• Do not place the product in a microwave oven or a high-pressure container. Otherwise, the battery
could become hot, emit smoke, rupture, or catch fire.
• If battery acid gets into your eyes or on your skin, immediately rinse the affected area thoroughly with
water and seek medical treatment.
• If battery acid leaks from a battery, or the product emits a bad odor, move the product away from
flammable objects immediately. If the product is not moved, electrolytes leaking from the battery
become hot, emit smoke, rupture, or catch fire.