User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Starting a Scan
- Scanning with Document Capture Pro in Standard View
- Scanning with Document Capture Pro in Simple View
- Scanning with Document Capture - Mac
- Scanning in Epson Scan 2
- Scan Resolution Guidelines
- Scanning Special Projects
- Scanning Two Originals onto One Sheet (Stitching Images)
- Scanning Multi-Page Originals as Separate Files - Windows
- Saving Scanned Documents as a Searchable PDF Using Epson Scan 2
- Saving Scanned Documents as a Searchable PDF with Document Capture - Mac
- Saving a Scan as an Office Format File - Windows
- Saving a Scan as an Office Format File - Mac
- Scanning to a SharePoint Server or Cloud Service - Windows
- Cleaning and Transporting Your Scanner
- Solving Problems
- Technical Specifications
- Notices
135
• If you are using a USB connection, make sure the connection mode switch is set to the position
(ES-300W/ES-300WR).
• Make sure you are operating the scanner within the operating temperature range (ES-300W/ES-
300WR).
• Make sure the USB cable is securely connected to the computer.
• Connect the scanner directly to the computer. The scanner may not work properly when connected
through a USB hub.
• Use the USB cable that came with the scanner.
• Use a USB 3.0 (SuperSpeed) port. You cannot use a USB 2.0 or USB 1.1 port to operate the scanner
on a USB power supply.
• If the scanner does not turn off when operating on the battery (ES-300W/ES-300WR), disconnect the
AC adapter and USB cable and press the reset button on the bottom of the scanner. Then reconnect
the scanner and try again.
Parent topic: Solving Scanning Problems
Related tasks
Changing the Power Save Settings