User`s guide

Introduction 7
Chapter 1
Introduction
About Your Printer
®
Windows
®
applications.
Use the Software CD-ROM that came with the printer to easily configure the network interface for
use on the TCP/IP network and install the printer driver.
If you want to configure the network interface for protocols such as TCP/IP and SNMP, use
EpsonNet Config, the configuration utility provided with your product, to quickly and easily
configure the network interface to use those protocols.
Note:
The EpsonNet Config utility configures the network interface to work only with protocols that exist on your
network. This does not imply that you can use all of the above-mentioned protocols on your network or
operating system. The protocols that the network interface can use may vary depending on the operating
system and the network configuration.