User`s guide

Tips for Administrators 53
Print a network status sheet to confirm the new IP address.
See the User’s Guide for more information about settings on the printer’s control panel.
Network Menu
These items are used to make network settings on the printer’s control panel.
To activate the Network Menu settings, you must turn off the printer for more than five seconds and then
turn it back on.
Universal Plug and Play
When you connect your printer to the network, an IP address is automatically assigned, and the
printer’s icon appears in the My Network Places folder.
Right-click the printer’s icon in the My Network Places folder and select Properties to see
information about the network interface.
To use this function, Universal Plug and Play must be installed.
Before using the Universal Plug and Play function, you must enable the Universal Plug and Play function
in EpsonNet Config. See the EpsonNet Config User’s Guide.
Item Settings
NETWORK SETUP Panel, Auto, Init N/W set
IP ADDRESS 0.0.0.1 to 255.255.255.254
SUBNET MASK 0.0.0.0 to 255.255.255.255
DEFAULT GATEWAY 0.0.0.0 to 255.255.255.255