User`s guide

Troubleshooting 51
Problems Specific to Your Network Environment
Windows 2000 Environment
A dial-up connection dialog box appears when printing with TCP/IP via EpsonNet Print.
Printing a Network Status Sheet
Before you start configuring the network interface, be sure to print a network status sheet that
contains important information such as the current configuration and the MAC address of the
network interface.
To print a network status sheet, follow the steps below.
1. Press the r Right button on the printer’s control panel once to enter the Menu mode.
2. Press the d Down button until TEST PRINT appears on the LCD panel, then press OK.
3. Press the d Down button until NETWORK SHEET appears.
4. Press the OK button.
5. Press the OK button again to print the network status sheet.
❏ You cannot print a status sheet in the following cases: the printer has started printing, it is offline, or it
is not ready to print.
❏ See the printer User’s Guide for more information on the printer’s control panel.
Cause What to do
You have selected a phone line or
modem (for Internet Explorer 4.0x) for the
Internet connection.
Printing ends normally after you cancel this dialog box, but the
message appears every time you print. Connect to the Internet
using a local area network or start a dial-up network manually.