User`s guide

3. Turn on your printer. After the status lights go off, print a network status sheet.

After turning off the printer, wait until the status lights go off before turning it back on; otherwise

the network interface may not work correctly.

Now, you can configure the network interface to use on the TCP/IP network and also install the

printer driver. See the next section.

Configuring the Network Interface

Configure the network interface for use on the TCP/IP network and install the printer driver on

your computer.

1. Insert the Software CD-ROM in the CD-ROM drive.

2. The Software Installation screen opens automatically.

If the Software Installation screen does not appear, double-click EPSETUP.EXE on the

CD-ROM.

3. Click User Installation if it appears.

4. Make sure that all applications are closed, and then click the Easy Install button.

5. Select Network.

If your printer is connected to your computer with a USB cable, select Local. Then follow the on-screen

instructions.

6. Click the Install button and follow the on-screen instructions.

If the Windows Security Alert window appears, click the Unblock button; otherwise the printer is not

listed on the screen of EpsonNet EasyInstall.