User`s guide

20
Windows 2000
For Windows 2000, use the following procedure to install the necessary components.
1. Click Start, point to Settings, and then select Network and Dial-up Connections. The
Network and Dial-up Connections screen appears.
2. Right-click the desired network connection and then select Properties.
3. Check if the following necessary components are in the list. If they are already installed, go to
the next chapter.
The following table lists the components required for configuring the network interface with
EpsonNet Config.
The following table lists the components required for network printing.
EpsonNet Config’s setting screens Necessary components
Printing method Necessary components