User`s guide

17
The following table lists the components required for configuring the network interface with
EpsonNet Config.
The following table lists the components required for network printing.
5. If the necessary components are not in the list, click Install to install them, as described below.
For LPR:
Internet Protocol (TCP/IP) is installed by default. You cannot add or delete it.
For Microsoft Network Shared printing:
Select Client and then click Add. Select Client for Microsoft Networks and then click OK.
6. For LPR or Microsoft Network Shared printing:
Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box
to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address and so on if
necessary, then click OK.
7. Restart the computer.
The necessary components are now installed. Go to the section “Connecting the Network Interface
to the Network” on page 21.
EpsonNet Config’s setting screens Necessary components
Printing method Necessary components