User`s guide

Introduction 10
The data light on the right side flashes when the host interface receives data.
If the light on the left side is solid green and the light on the right side is off, the connection is
disconnected.
Network Connector
RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You can use this
cable for both 10Base-T and 100Base-TX. (On some models, 1000Base-T is also supported.)
You must use a category-5 shielded twisted-pair cable to connect the network interface to a network.
About the Software
The Software CD-ROM provided with your printer includes the following network software.
The software provided varies depending on your printer model.
❏ EpsonNet Config is a Windows-based configuration utility for administrators that allows you
to configure the network interface for various protocols such as TCP/IP and SNMP. See
“EpsonNet Config” on page 38.
❏ EpsonNet Print is a utility that enables TCP/IP printing for Windows. (Windows
Vista/XP/Server 2003/2000/also support OS standard LPR printing.) See “EpsonNet Print”
on page 39.